AL M Posted March 22, 2015 Share Posted March 22, 2015 I recently bought a new Delco Moraine booster, master, proportioning valve and stainless lines from Right Stuff Detailing. Great stuff by the way. I noticed on the back of the prop valve that hangs off the master there is what seems to be a rubber boot or grommet almost like a button. Does this need to be bleed? Or can I just throw it on there? Link to comment Share on other sites More sharing options...
Sam (Bones) Posted March 22, 2015 Share Posted March 22, 2015 if lines go to it, it needs to be bled Link to comment Share on other sites More sharing options...
Rob Peters Posted March 22, 2015 Share Posted March 22, 2015 Al, it has been awhile but to bleed the rear brakes, I think you will need to press and hold that P-valve Button in during bleeding. It doesnt depress very far, onlu about 1/8th to 1/4 inch depression. Rob Link to comment Share on other sites More sharing options...
AL M Posted March 22, 2015 Author Share Posted March 22, 2015 Thanx guys. Link to comment Share on other sites More sharing options...
John S Posted March 24, 2015 Share Posted March 24, 2015 I used a small piece of wood and used it as a wedge to depress button. John S Link to comment Share on other sites More sharing options...
AL M Posted March 24, 2015 Author Share Posted March 24, 2015 John did you posts pics of that at one time?? Link to comment Share on other sites More sharing options...
John S Posted March 27, 2015 Share Posted March 27, 2015 No I did not but I think someone else might have. John S Link to comment Share on other sites More sharing options...
Recommended Posts