bodene Posted February 12, 2016 Share Posted February 12, 2016 I am doing rear disk conversion and it looks like I need to change portion valve although right stuff Tech says I don't. Is there a direct replacement that will bolt right in without modifying the brake lines or using a pressure regulator? 72 monte! Any help would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
monte70car Posted February 12, 2016 Share Posted February 12, 2016 Jeff you are correct in regards to needing a disc/disc portion valve. This is the valve you need http://mattsclassicbowties.com/contents/en-us/p3281.html it will bolt on the frame in the stock location and use the stock lines. Quote Link to comment Share on other sites More sharing options...
bodene Posted February 12, 2016 Author Share Posted February 12, 2016 That's all I need I don't have to put a pressure regulator on it Quote Link to comment Share on other sites More sharing options...
monte70car Posted February 12, 2016 Share Posted February 12, 2016 No need for a pressure regulator. The master cylinder will apply the pressure to the system Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.