Jump to content

A/C Filter Drier


Mains

Recommended Posts

I swapped out the A/C compressor on my Monte last night and replaced the condenser drier also with a Napa part# A8300 and didn't have much luck with the drier, the threads on the inlet side of the drier were slightly longer than the threads on the one I took off and therefore the o-ring on the inlet side would not compress and seal when I went to recharge with R134.

 

There's no part number on the drier I removed so just wondering if anyone else has run it to this problem and what driers other people have used and where they got them?

 

Thanks,

Coby

Link to comment
Share on other sites

I have picked up three driers form NAPA and they all worked fine. I wonder if they gave you the wrong number. The NAPA part number my 72 took is 208508.

Link to comment
Share on other sites

The AC Delco looks the same as the one I took off. I looked up the Napa drier I had online and it should be the right one, same part # as a 70 Chevelle too but it would not seal for me. I think I'll give the AC Delco a try, thanks guys.

 

Coby

Link to comment
Share on other sites

×
×
  • Create New...