Jump to content

Heater control Cables - NON-A/C


snomobeelr

Recommended Posts

unless someone else chimes in I have that exact same set up complete in my parts shed sitting on a bench and is all hooked up still. tomorrow after work I will head out in daylight and get some pics for you as to what goes where for each one if you would like ?

Darren

Link to comment
Share on other sites

ok lets see if i can explain this...

the bottom cable marked       off...............deice   that cable is the shortest and goes to the first pin on the left of the heater box in my picture where the box starts and is narrow

The middle cable marked     Cold..........Hot    that goes to the Top and furthest away pin at the end of the heater box on top as seen in your picture

The Top heater cable marked   Off............Air     Thats the middle pin and is tucked in behind the box and mid way from top to shortest. it cant be seen in your picture but if you look at your then mine you can roughly guess where she is going to be by feel if you dont remove your box and feel from between the firewall and heater box. 

 

IMG_1977_zpsnnfpyeov.jpg

 

 

Darren

Link to comment
Share on other sites

Darren, I am thinking my heater box may be messed up, I missing that middle pin and is tucked in behind the box .  I pulled the dash back out will look at it tomorrow or friday..  

 

Thanks again ,  Alan 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...