Jump to content

Does anyone have a diagram of the neutral safety switch?


Recommended Posts

Can someone tell me which wire goes where on the neutral safety switch???

 

Regards Wheel..

Link to comment
Share on other sites

The switch has like 6 "poles" on it.  2 are for neutral safety, 2 for back up. and 2 for ???, I thought it woild be fairly simple to replace the connectors with loose wires... It isn't. 

Link to comment
Share on other sites

The one on the steering column? I believe the last two were a clutch safety switch if your car was a standard...I believe, at work now might be able to look at a schematic later when I get home.

Link to comment
Share on other sites

You must have a 1972? The two purple wires are for the neutral safety switch.  The green and pink or dark green and light green are the reverse light wires. The next two are pink if I remember correctly. They are for the fasten seat belt function/ seat belt warning.

  • Like 1
Link to comment
Share on other sites

Wheel,

 

Here is a page from the 1970 Monte Carlo Wiring Diagram Manual that shows the neutral safety switch on the left side of the page about in the middle vertically.  Note that the two wires are purple and purple with a dark blue stripe and they attach differently for an automatic transmission car versus a manual transmission car.  It appears that the middle pair of connectors are the correct location for the neutral safety switch wires for an automatic transmission car.

 

BTW, I can send you all 14 pages of the wiring diagram manual as jpg files that you can print full page size.  Just let me know what email address to use if you want me to send them.

 

post-567-0-19642000-1495859879_thumb.jpg

  • Like 1
Link to comment
Share on other sites

 Found this diagram in the Assembly manual (lower left corner show 6 wires) con't find the wiring diagram at this point. Each connector is keyed to only connect at the proper location.....good luck!

this one really helps.... Ty so much... Even takes care of other issues...

Link to comment
Share on other sites

You must have a 1972? The two purple wires are for the neutral safety switch.  The green and pink or dark green and light green are the reverse light wires. The next two are pink if I remember correctly. They are for the fasten seat belt function/ seat belt warning.

Yeah the drawing shows realred posted showed it clearly... AT A BRAVE MOMENT I TORE THE WHOLE WIRING LOOM OUT... silly me...

Link to comment
Share on other sites

Wheel,

 

Here is a page from the 1970 Monte Carlo Wiring Diagram Manual that shows the neutral safety switch on the left side of the page about in the middle vertically.  Note that the two wires are purple and purple with a dark blue stripe and they attach differently for an automatic transmission car versus a manual transmission car.  It appears that the middle pair of connectors are the correct location for the neutral safety switch wires for an automatic transmission car.

 

BTW, I can send you all 14 pages of the wiring diagram manual as jpg files that you can print full page size.  Just let me know what email address to use if you want me to send them.

 

attachicon.gifP1042138.JPG

Thanks.. you already send me those but they're really hard to read.... Old age comes with defects hahahaha. They will come in handy rewiring the dash i hope... Need to get out those binoculars....

Link to comment
Share on other sites

 Found this diagram in the Assembly manual (lower left corner show 6 wires) con't find the wiring diagram at this point. Each connector is keyed to only connect at the proper location.....good luck!

B.T.W. Got anymore of these handy drawings???

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...