72_Monte Posted May 27, 2017 Share Posted May 27, 2017 Is there a car I can take the rear disk brakes from to put on the rear of the Monte ? Quote Link to comment Share on other sites More sharing options...
NC72MC Posted May 27, 2017 Share Posted May 27, 2017 Your best bet is to go with a kit from wilwood, great quality and bolt up. By the time you pull something off a donor and rebuild it to make sure it holds up or works correctly you are better off. Quote Link to comment Share on other sites More sharing options...
420ponies Posted May 28, 2017 Share Posted May 28, 2017 I have a set off a 1998 camaro. it fits a 10 bolt rear axle. just have to make the custom ends for the E-brake cables.Have too also change out the proportioning valve. CPP products has the answers for the swap. They also just had a write-up on Hot Rod Magazine on it too. Quote Link to comment Share on other sites More sharing options...
Blackhawk Posted May 30, 2017 Share Posted May 30, 2017 You can also use a set from a S10/Blazer, around the 1998+ models. Here's some information from the Chevelle forum: http://www.chevelles.com/forums/16-brakes-suspension-steering/30724-using-s-10-blazer-rear-disk-brakes.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.