Monte123 Posted June 7, 2017 Share Posted June 7, 2017 Hey folks, I am in the midst of converting my 350 2 barrel into a 4 barrel carb car. What a pain in the backside. I got a bunch of brackets, a couple throttle cables and though I could use the original kick down bracket but that's a big nagatory right there. Anyone out there have the stuff I need to make this happen and still look like the factory did it? Link to comment Share on other sites More sharing options...
cny first gen 71 Posted June 7, 2017 Share Posted June 7, 2017 I didnt have any of these problems when I did mine. Are you staying with a qudra jet? All brackest and cables worked fine, have to adjust downshift cable. Link to comment Share on other sites More sharing options...
Monte123 Posted June 9, 2017 Author Share Posted June 9, 2017 All parts are stock, with the 2 barrel brackets the throttle held open a 1/4 inch and the kick down cable wont allow full throttle even if I pull the lock up. Link to comment Share on other sites More sharing options...
Jared Richey Posted June 16, 2017 Share Posted June 16, 2017 I'm sorry but when I read "that's a big negatory right there" silently I heard Johnny Cash loud and clear. Lol Link to comment Share on other sites More sharing options...
Jared Richey Posted June 16, 2017 Share Posted June 16, 2017 You will most likely need a 4 barrel throttle cable Link to comment Share on other sites More sharing options...
Recommended Posts