ChrisM Posted July 9, 2017 Share Posted July 9, 2017 Hey everyone. I am trying to figure out a bracket to use to hold the turbo 350 kick down cable, the throttle cable on on a 396. I have a holly 4 barrel on a edelbrock Victor Jr 454-0. I have a few brackets at home, but none of them seem to fit right either on the intake or wrong size for the 350 Anyone have a close set up to this with pictures? Or parts? Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted July 10, 2017 Share Posted July 10, 2017 Did they ever use the th350 with a big block? Quote Link to comment Share on other sites More sharing options...
monte70car Posted July 10, 2017 Share Posted July 10, 2017 They didn't, but they do make a bracket that will bolt to the rear of the carb. Quote Link to comment Share on other sites More sharing options...
ChrisM Posted July 10, 2017 Author Share Posted July 10, 2017 Would you happen to know which bracket to use? Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted July 11, 2017 Share Posted July 11, 2017 I'm thinking you may have to modify one to work. Quote Link to comment Share on other sites More sharing options...
monte70car Posted July 11, 2017 Share Posted July 11, 2017 So based on what I can find you will need this part https://www.summitracing.com/parts/hly-20-112/overview/ and this one https://www.summitracing.com/parts/hly-20-119/overview/. The bracket that i have on my TBI Holley is only available for a 700r4 trans. Quote Link to comment Share on other sites More sharing options...
ChrisM Posted July 12, 2017 Author Share Posted July 12, 2017 That's awesome, thank you guys very much Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.