Jump to content

Headers for a350 Votec


Crank

Recommended Posts

The vortec 350 doesn't require different headers than any other small block.  The intake is a bit different, but exhaust is the same. 

I agree with going full length.

 

I've heard good things about Hedman Elite series headers. Good fitment, quality and reasonably priced. But I have no personal experience.

 

I personally have put Dougs ceramic coated headers on my big block Chevelle and I have helped friends put Dougs on a big block 1970 Plymouth 'Cuda and on a 1968 455 Pontiac Firebird.  They are a bit pricey compared to most but none of these installs required "performance dents" to get them to fit properly, which is very important if you get ceramic coating.  Quality and fitment is top notch.

 

I have Hookers on my small block Monte and would not recommend them. Drivers side hangs too low and the bends are poorly designed. I can't get a plug wrench (or any wrench) on #6 to tighten it properly and I couldn't get a box wrench on several standard header bolts so I couldn't tighten them down. An open end wrench wouldn't seat so the heads rounded. I ended up buying ARP 12 point bolts with the small 5/16" head just so I could get a box wrench on to tighten them. They were on the car when I bought it (of course the header gaskets were leaking) and they won't go back on if I ever take them off.

 

Scott

 

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I agree with you Scott. I have hookers on my 70 Torino and encountered the same problems. Only 2 1/2 inches clearance, so you know what happened. Just didn't want to make the same mistake again. Thanks for the input, I really appreciate it!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...