MikeParker Posted May 15, 2018 Share Posted May 15, 2018 Hi - and thanks for adding me to the club. I have a 1970 - originally a bench car, but I am changing over to buckets. The interior of the car is currently down to the floor. My question is does anyone have the .pdf that shows how to install the console. I *think* it was an old article for a chevelle. It shows step-by-step where to put the hole in the floor for the shifter cable, where to mount everything. Much appreciated! Quote Link to comment Share on other sites More sharing options...
Palmbchmonte Posted May 15, 2018 Share Posted May 15, 2018 Welcome Mike I will be following along as I am getting ready to do the same thing. Quote Link to comment Share on other sites More sharing options...
Mo's70MCs Posted May 16, 2018 Share Posted May 16, 2018 Hi - and thanks for adding me to the club. I have a 1970 - originally a bench car, but I am changing over to buckets. The interior of the car is currently down to the floor. My question is does anyone have the .pdf that shows how to install the console. I *think* it was an old article for a chevelle. It shows step-by-step where to put the hole in the floor for the shifter cable, where to mount everything. Much appreciated! Try this it might help some. http://www.buickperformanceclub.com/buckconsole.htm Quote Link to comment Share on other sites More sharing options...
MikeParker Posted May 16, 2018 Author Share Posted May 16, 2018 Thanks! I also found this one - I'm going to print it out and take a closer look. Let me know what you think. http://macc.chevelles.net/console_install.pdf Quote Link to comment Share on other sites More sharing options...
Mo's70MCs Posted May 16, 2018 Share Posted May 16, 2018 Mike, How rude of me not to welcome you aboard first. Welcome aboard nice to have another gearhead amongst us. That Chevelle install PDF much more detailed with lots of pictures. I went ahead and saved it myself. Quote Link to comment Share on other sites More sharing options...
Monteman1971 Posted May 16, 2018 Share Posted May 16, 2018 Welcome to the boards! Being that you are down to the sheet metal.....almost everything is already "dimpled" for you. If you check the floor carefully you'll see that the places to drill are already there by a series of "dimples" in the floor. This way as the car came down the line, line workers didn't have to think about where to drill. The only ones missing are the ones for the rear mount because that was welded in. The link given above gives you the measurement for the rear mount but I would suggest drilling and mounting the console to the floor (using the dimples) and then marking the floor for the rear mount using the mount itself. Steve Quote Link to comment Share on other sites More sharing options...
70white402 Posted May 16, 2018 Share Posted May 16, 2018 is this also for 4 speeds with console? Quote Link to comment Share on other sites More sharing options...
RealRed70 Posted May 16, 2018 Share Posted May 16, 2018 A 4 speed console mounts the same way. You will need to add the correct hump to your transmission tunnel for a 4 speed. Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted May 28, 2018 Share Posted May 28, 2018 For an automatic there is a smooth round place on the floorboard as the floorboard goes up the hump you can feel it and that's where the hole goes for the shifter cable Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.