sredmyer Posted August 31, 2018 Share Posted August 31, 2018 So I am currently having the 454 for one of my SSs rebuilt and am trying to figure out what are the correct bolts for mounting the Quadrajet to the intake. Every source I have found says the front uses two long bolts. However, for the back some say it should be two short studs with nuts and lock washers while others say it should be short bolts. Does anyone know for sure? Also does anyone know where I can get the proper bolts and/or studs. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted August 31, 2018 Share Posted August 31, 2018 You could check with this vender, good luck!! http://www.amkproducts.com/Chevy_Fastener_Kits.asp G-5263 CARBURETOR - ROCHESTER 4V ( STUDS, HX BOLTS, NUTS, COPP WA'S ) Quote Link to comment Share on other sites More sharing options...
sredmyer Posted August 31, 2018 Author Share Posted August 31, 2018 Perfect! thanks Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted August 31, 2018 Share Posted August 31, 2018 Any q-jet I've ever seen has the long bolts in the front and studs in the rear. Thats the way I did mine on my sb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.