Jump to content
Home Page  | How to Join  | Official Merchandise  | Western Meet | Eastern Meet | Meet Photos | Technical Info  | Museum  | Parts Sources  | Officers
Sign in to follow this  
1970mcss

Washer Pump Rebuild Success!!!

Recommended Posts

I was getting ready to order a first generation replacement washer pump from the parts place and I thought why not try to rebuild the original. The old pump was all seized up and I thought it was cooked. I took apart everything but the coil and soaked the small parts in simple green overnight. I cleaned the base with a brush and simple green and soaked the pivoting lever pivot with simple green. The lever started to move freely, I then cleaned all the small parts and started putting the pump back together. I applied all purpose grease to the moving parts. The plunger was still in good shape. I re-installed it the I was happy that it worked. I'm sure some members have re-built these pumps but I wanted to pass this along for those who might think the only way to fix them it to buy new.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×