Jump to content

turn signal/ 2 questions


Blake350

Recommended Posts

Two quick questions...need to replace the turn signal indicator bulbs on dash- thought I had lost right side blinker but it was only the indicator out...what is easiest way to get at them?? is it with dashpad removed? 

  Also since day one ,turn signals have flashed very slow--an upgrade to flasher maybe?it is all original '72 flasher and incandescent bulbs   thanks!
 Brian

Link to comment
Share on other sites

Yes, remove the dash pad to access the bulbs, but the very first thing you will want to do is remove your negative battery cable so that you do not smoke your printed circuit board while you are behind the dash. This is a VERY important thing to do. A must. Then replace the bad bulbs. There are 6 screws holding the dash pad down. Remove the screws, then lift the front of the pad up and pull the pad toward you. There are six clips holding the pad down on the windshield side of the pad. Be sure not to loose any clips. Try a new flasher.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...