Crazy question for drag racers
Posted 10 February 2008 - 09:49 AM
Have any of you racers fabbed or purchased any kind of shield to keep the rubber off the bottom of the car?
Will be running 275-60/15 BFG Drag Radials.
Posted 10 February 2008 - 11:31 AM
I personally do not have a show car and will just run my hand on the inner fender rolling balls of rubber and letting it drop to the floor, same on the rest of the areas. I will spray detailer on the trim and fender to get any last rubber off the panels.
But... seeing how you have a frame off resto I would use a spray on product to make clean-up easy...just spray it all over the area even under the car. I personally have never used it but have heard comments from people who have and it seemed to work.
I would think this would be the best route to try as it could even be sprayed on the inner fenders where no shield could stop all the rubber.
Here's a link to the product...Burnout Guard
Posted 10 February 2008 - 01:09 PM
Ill paint your toenails if you can stand still long enough
Click here to see my Monte build so far
---RIP Robyn Lance---
Posted 10 February 2008 - 07:25 PM
I got some but never used it. I have drag radials and they make way less mess than slicks or "street slicks".
(Carl- if you haven't already gotten your BFGs, I would suggest taking a look at the Mickey Thompson drag radials.)
Did you ever notice that when you buy aftermarket stuff, you have to buy more aftermarket stuff to make it all work?
70 Monte in the 11s
68 Camaro in the 10s
Fast and quiet is more fun!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users