So I've got the Monte in the Grarage cleaned out and the Monte inside. Since then I have removed the vinyl top and the glue using M.E.K. (WOOOOOW) and am looking for things I can do to continue to make progress on the Monte.

I was wondering if someone could post the links for removing the stock AC as I live in WA and we need is 4/60 (which as a memember explained to me late ment 4 windows down doin 60).

Also, I removed the windshield wiper bottle and tubes leading to the "sprayers" in the hood as well as the ones leading to the to part on the fire wall. The part thats attaaached to the fire wall... how much of that can I remove?

This what I'm talking about. how much of this can I remove tahts conneccted to the firewall?

That is the washer pump. Are you trying for the clean look or ???

first remove the hood, then both front fenders. Once that's done it should be pretty easy to pull the motor. After the motor's out remove the windshield followed by the dash. Now there are 3 screws you can chisel out and the wiper motor will come right out....

If your that bored,keep huffing the MEK!
That stuff is nasty, I hope you did that OUTSIDE!!

Here are a couple topics I found. If you want to keep you heat you will need the black one like Bill 502 has but if you dont care and are going to remove it all you can use the BMR one. If by chance I am wrong someone will correct me. On the wipers are you removing the arms if not I would leave the motor in case you get caught in the rain or keep rain x with you.





Link

Link II

Make sure Adrian that you keep the left wiper arm and blade just in case it rains on the wetside of Washington. This way you can at least stick your arm out and wipe the windshield. LOL JK

His arms barely reach the steering wheel, how is he supposed to reach the windsheild?

:Roflmao: You guys. i actually wanted to keep thw wipers, just get rid of the parts for the washer.


And my arms ARE NOT SHORT!!!!!!!!!!!!!



















The rest of me is