Jump to content

montefrazer

(Non-dues paying)
  • Posts

    245
  • Joined

  • Last visited

Everything posted by montefrazer

  1. Overdrive I remember it being a dark color but that was 20 or more years ago. Darrin maybe there was a mid or late year change but I had an original 70 Monte with cruise and it was chrome. It was a full halo car so early to mid model year build.
  2. That isn't the right lever for a 70. In 70 it was chrome with a chrome button not black. I had a 70 with cruise back in the early 80s. I also saw an SS Monte at a NMCOA meet that had cruise. Don't remember if it was a 70 or 71 anymore. i asked him about it and he told me it was dealer installed, not factory. It was mounted behind the compressor and down the back of the inner fender. The speedometer cables were too long and connected to the cruise unit at some extreme angles. Not letting me post a link to a picture but just google 70 Chevelle cruise control pictures and you will find it.
  3. Any parts for the rear defoger are worth getting, too. The switch is correct for any 70-72 Monte or Chevelle.
  4. montefrazer

    intake bolts

    Joe still looking for this? PM me if you are.
  5. If you have the right size Allen wrench to fit the adjuster on the points and a cap with the sliding metal door, you can skip the feeler gauges and dwell meter. Put a light coat lube on the cam the points ride on, install points, start car, open door on cap and put Allen wrench in adjuster, slowly turn wrench to your right until engine runs badly or dies, turn wrench left half a turn and you're done. Then set timing.
  6. Eastwood also has a good paint. http://www.eastwood.com/factory-gray-hi-temp-coating.html
  7. Thanks for the update and glad you got it fixed. Now you're an expert on GM horn systems. Sometimes the small problems are the hardest to find.
  8. Touching the wire to any metal piece it can reach should make the horn sound. Clicking in the engine bay is horn relay contacts working, so a short somewhere in the system at or after the relay.
  9. This video will show you the tools and how to get it off. About 2 minutes in
  10. That style buckle was standard for 70-72. There was also a smaller brushed stainless deluxe version. http://www.firstgenmc.com/ubbthreads/ubb...true#Post382429
  11. "I’d just like to know where those sellers found that information." I'm sure some sellers are basing their info on google searches and past ebay ads. Research, as Murphy is doing here, is a must before buying.
  12. "Several sellers mention in their description "with auto-temperature control" What does that really mean?" That is the set and forget system. Set your temp, turn on the system, and it automatically works to keep the interior at that temp. http://automotivemileposts.com/autobrevity/atc.html
  13. That set up is for a non stereo radio. Either AM or AM-FM mono radio. All stereo and 8 track radios got two front and two rear speakers.
  14. But I played with the levers a bit initially. Should that flap be closed more? Was this before or after you took the picture? If you moved the throttle linkage, part the gas pedal linkage is connected to, before you took the picture, it needs to close more. When cold, the choke should snap closed when that linkage is moved and be a bit hard to move when you push on it with your finger. Should close again when you stop pushing. When the engine is at operating temp, it should be fully open.
  15. What was the engine temp when you took the pictures? The choke isn't closed enough for a cold engine or not opened enough for a warmed up engine.
  16. Try contacting joseph on the site. He has a 72 with factory cruise.
  17. Not cheap but good stuff. It covers well so you don't need to buy a lot for a project like this. Foam brushes work well for applying it, or you can spray it. As said earlier, be careful or you will be wearing it for a while. Gloves and long sleeves help. Don't try to get all the rust off. It doesn't work well on bare steel. If you are going to paint over it, let it dry until there is just a light drag feeling when running a finger over it. Then you can use any paint/primer to cover it. Do it too soon and it will wrinkle. Do it too late and the only paint that will stick without sanding is their brand.
  18. http://www.classicmuscle.com/p-11589-console-courtesy-light-bulb.aspx Same as dome light. 32.85 here http://www.carpartsdiscount.com/auto/parts/catalog/chevrolet~monte-carlo~72.html?3593=410441
  19. it was like in 1971-72 monte carlo where the later half of 1971 some of our cars have the fasten the seat belt light and some didnt. Darren. That would be 1972 not 1971. "On January 1, 1972, NHTSA required passenger vehicles for sale in the United States to be equipped with passive restraints protecting vehicle occupants in frontal barrier crashes up to and including 30 mph, or alternatively, with a buzzer–light reminder system."
  20. And of coarse the local parts store had no idea what a kick down cable is..... Try calling it a detent cable.
  21. Use a radiator paint if you decide to redo yours. http://www.eastwood.com/eastwood-radiator-black-paint.html or similar. You could have cooling problems using regular spray paint.
  22. I wheel not be reading this post any more.
  23. Welcome. If you have rally wheels they were argent. If you have regular plain wheels with hub caps they were black.
  24. Welcome to the madness. Be aware that there are differences between 70 and 71-72 fenders. 71-72 can be made to fit a 70 with some work and a search of the site will show several threads about this.
  25. montefrazer

    1970 SS COPO

    Anything is possible and we can play what if forever. The only sure thing is none have been found, with proof, in 44 years so the odds are none ever will.
×
×
  • Create New...