Tazman

I have a 71 SS that I have been considering selling. I have 2 build sheets neither have been forged. My personal guarntee. PM sent.

Mines real. 2 Build sheets and numbers matching. Still for sale..

For the dual exhaust my build sheet shows *STD Dual Exhaust meaning it came standard on this car. Maybe the dual exhaust and F41 suspension were assumed with the Z20 code. But then again I show the G67 code for the auto leveling system which was also part of the Z20 SS package code so who knows?

There should also be a letter code stamped beneath the axle code to provide source information. ie: a E would denote Eaton as the posi traction source. Axle source codes are supposedly only to be a 8 digit alpha numeric code. You seem to have 9. Wish I had a answer for you but I don't. If you find out post it here I would be interested to know.

Guy claims to have tons of nos parts. Anyone ever order from him. No pricing is shown. Spendy I bet. Obsolete Chevy Parts

I was just looking up numbers on my carb yesterday. I have a Rochester Qudra Jet. The numbers on mine are 7041200 FA and then below that is 0681. It decodes this way. 70 is the prefix you will find on all Rochesters built from 70 through 75. I think this holds true for the Carter built carbs as well. The 4 represents the decade the carb was produced meaning the carb was produced for the 70 through 75 production models. The 1 stands for the actual year the carb was produced in my case 1971. The 2 indicates the actual model of the carb. In my case it stands for Quadrajet carburator (4bbl) Federal Standards. The first 0 means Chevrolet Division. A 1 or 2 in this posistion would mean the same thing. The last 0 refers to the transmission in the car. Even numbers here indicate a automatic transmission while a odd number would indicate a manual transmission.The FA is the customer code that was used by Rochester.There are no records that exist to correlate these letters to a specific plant.However you should find this same letter combination on your build sheet should you have one. The 0681 is the actual day the carb was manufactured. The first 3 digits indicate the exact day of the year. The last digit denotes the year. So in my case the carb was built on the 68th day of the year in 1971. Which is actaullly after the body build date on my cowl tag which might mean I do not have the original carb in my car. I am quite certain Carter numbers would decode the same way. From what I can see the 3620 number does not line up with any of the numbers in my reference. You might want to double check. Take a bit of steel wool and buff it up a bit. The closest number I can find is 7042220 which would indicate a 1972 Monte Carlo, 402 240hp with a automatic transmission.

I found this over on some hot rodders forum while surfing. It is a long post and if this information can be found elswhere on this forum and I missed it please feel free to delete. But I thought this was worth posting as this list decodes most of the GM codes you will find on your build sheet. These GM build sheet numbers decode as follows: AG7 6 way Power Seat AK1 Custom Deluxe Seat Belts AL5 Deluxe Rear Center Seat Belt '67. AN7 Strato-Bucket Seats, Swing out! Al3 Power Door Locks Al6 Power Tailgate Release AO1 Soft Ray Tinted Glass, all windows. AO2 Tinted Glass, windshield only. AQ2 Electric Seat Back Lock Release, '71 AQ5 Electric Seat Back Lock Release, '70 AS1 Shoulder Harness, '67+ AS4 Deluxe Rear Seat Shoulder Harness, '68+ AS5 Standar Rear Seat Shoulder Harness, '68+ AT8 Reclining Passenger Seat AU1 Electric Door Locks, '70+ AU3 Power Door Locks AV3 3 Point Seat Belts (from 1972 Build sheet) A20 Custom seat belts, '64 A20 Swing Out rear windows, Laguna A31 Power Windows A33 Power Tailgate Window A39 Custom Deluxe front and rear Seat Belts, 66+ A37 Seat Belt Equipment, '64 only. A41 Power Front Seat, 4-way A42 Power Seat, 6 way A41 Power Bucket Seat, 4 way. A46 Power Drivers Bucket Seat, 66+ A47 Custom Deluxe Seat Belts. A49 Custom Deluxe Seat Belts, w/retractors A51 Front Bucket Seats, Astro A52 Front Bench Seat A62 Seat Belt Delete A64 Custom Deluxe Rear Seat Belts, '65. A65 Split Front Seat w/arm Rest A66 Split Second Seat A68 Standard Rear Center Seat Belt. '67. A81 Head Rest, Bucket Seats A82 Head Rest, Bench Seat A85 Deluxe Shoulder Harness, '66 1/2 + A90 Electric Trunk Opener A93 Vacuum Door Locks, '69 BO1 Police Body Equipment, '64-65. BO2 Taxi!! '64-65. BW2 Deluxe Body Side Molding BX4 Body Side Molding BX8 Full Body moldings BW1 Delete tailgate ornamentation. B2H Interim Equipment Change B2M No power steering. B22 Door trim pad emblem " SS " B37 Colored floor mats B44 Removable Load floor carpet B55 Deluxe Front Seat Cushion, '67+ B70 Padded Dash '64-65. B75 lining lug compartment, '69 B80 Roof Drip molding B81 *Delete tailgate molding. This would delete the horizontal trim strips on the tailgate of a '70-'72 El Camino or GMC Sprint. B84 Body Side Molding B85 Beltline Reveal Molding B90 Door Window frame moldings B93 Door edge guards B94 "GMC" tailgate emblem ('71-'72 GMC Sprint only). B95 Rear end panel moulding, '69 B96 Wheel well moldings CA1 Power Roof CB1 Vinyl Roof, Touring CB7 Vinyl Roof cover. CD2 Windshield Washer Level Control, '70+ CD3 Electro-tip Wipers, '70+ CE1 Headlight Washers CO5 Convertible Top, Manual. CO6 Convertible Top, Power CO8 Vinyl Roof, full CO9 Padded Vinyl roof C14 Two Speed Wipers, '64. C24 Special Windshield Wipers C48 Heater Delete C49 Electro Clear defogger C50 Rear window defogger C51 rear window air deflector C56 = I/P side vent /70 Upper Level Vent / Astro Ventilation C60 Air Conditioning, 4 seasons. C65 Air Conditioning, Deluxe version. D24 Litter container D33 Remote Control mirror D34 Vanity visor mirror D35 Sports mirrors D55 Console D64 Illuminated Visor Mirror D68 Twin Remote Sport Mirrors D80 Spoilers D88 Sport Stripe, '70+ D91 Conquista package D96 Wide Paint Stripes, * '67+ refer's to body side accent stripe D99 Two Tone Paint Moldings FE8 Radial Tuned Suspension F40 Sport suspension F41 Sport Front and Rear Suspension, '69+ GS1 2.73 Ratio Axle (from 1972 Build Sheet) GY2 *3.31 ratio axle ('71-'72 Chevelle / El Camino / GMC Sprint). G11 2.56 Rear Axle G66 Air Shocks, rear. G67 Controller for Air Shocks. G75 3.70 rear G76 3.36 rear axle ratio G80 Positraction rear G82 4.56 Rear axle G84 4.10 Rear axle G92 Performance rear 3.08 G94 3.31 rear G95 Economy rear 2.73 G96 3.55 rear G97 2.73 Rear ratio GW5 273 Ratio Axle HO1 3.07 rear HO5 3.73 rear axle ratio J50 Power brakes J52 Front Disc Brakes, '67+ J65 Metallic Brake linings JL2 Front Disc Brakes, '70+ JL8 ('69 only) 4-wheel disc brakes KD5 Heavy Duty PCV System KO2 Clutch Fan KO5 Engine Block Heater K19 AIR , smog pump, '66+ K24 Closed Engine Ventilation, PCV. K30 Cruise Control K66 Transistor Ignition. K72 Emission Control Delete K75 Emission Control Delete K76 61 amp alternator K77 55 amp alternator K79 42 amp K81 62 amp K85 63 amp L14* Refers to: = 307 CID STD V8 (from 72 Chevelle) L22 Six Cylinder 250 L26 230-140hp L30 327-275 Hp L34 396-350 Hp L35 396-325 Hp L48 350-300hp, '69+ L61 230 cid L65 350-250hp, '69+ L72 427-425hp Yenko, '69 L73 327-250hp, '68 L74 327 300hp L77 4 barrel carb, 283-220 hp L78 396-375 Hp L79 327-350 Hp L89 396-375hp, Aluminum Heads LF6 400-255hp 2 bbl, '70 (Monte Carlo) LM1 350-255hp, '69 LS3 400-330hp, '70+ LS4 454-235hp LS3 402-300hp in'71...240hp in '72 LS5 454-365hp in '71...270hp in '72 - LS5 (also 360 HP in '70). LS6 454-450hp, '70 LT4 400-180hp L65 350-145 2 barrel L90 Six cylinder MO1 Heavy Duty Clutch MC1 Heavy Duty 3 spd Transmission M10 Overdrive M11 Floor Shift Transmission, '71+ M13 Heavy Duty Transmission M20 4 spd standard transmission. M21 4 spd close ratio M22 4 spd, Heavy Duty M35 Powerglide automatic, 2 speed. M38 Turbo 350 automatic M40 Turbo 400 automatic M55 Transmission Cooler NA9 Evaporative Emission Controls NB2 Refers to:: EXH EMISSION (from 72) NC8 Chambered Exhaust System NK1 Cushioned Steering Wheel NK2 Custom Steering Wheel, '71+ NK4 Sport Steering Wheel, '71+ N10 Dual Exhaust N30 Deluxe Steering Wheel, '67+ N31 Custom Steering wheel N33 Tilt steering N34 Wood grained steering wheel N40 Power Steering N41 Power steering N65 Space saving spare N95 Wire Wheel covers N96 Simulated Magn. Hubcaps P19 Spare tire lock P58 7.14.4 Whitewalls P61 7.75-14 W/W P62 7.75-14.4 W/W P67 6.95-14 w/w P77 8.25-14 w/w P90 G70-15 White Stripe P91 G70-15 Red Stripe PA2 Simulated Wire Wheels, 2nd style, '68+ PA3 Deluxe Wheel covers PE1 Turbine 1 wheels PE2 Turbine 2 wheels PK2 G78-14 w/w PK4 G70-14 Red Stripe PL3 E78-14 White Stripe PL4 F70-14 F70-14 White Stripe PL5 F70-14 White Letters PM6 G78-14 White Stripe PM7 F60-15 White letters, SS models. (also Sprint SP models). PN5 7.75-14 8 ply tires PO1 Wheel Trim Cover PO2 Simulated Wire Wheels, 14" PO6 Wheel Trim Rings PQ7 8.25-14 w/w tires PR3 8.25-14 8 ply w/w PU8 G78-15 White Stripe PL2 E78X14 B/WALL PW7 F70-14 White Stripe PW8 F70-14 Red Stripe Tires PX5 F78X14 Black Wall Belted (70) PX6 F78-14 w/w PX8 G70-14 w/w PX9 G70-14 Dual White Stripes PY4 F70-14 w/w PY5 F70-14 Red Stripe PY7 G70-14 Red Stripe QDR GR78-15 radial whitewalls QEH E78-14 bias White Stripe QEL HR78-15 Radial white stripe QGF G70-14 Bias White stripe QGK G78-14 QGL G78-14 bias white stripe QHE H78-14 Bias QHF H78-14 Bias white stripe QQZ HR70-15 radial whitewall QRM GR70-15 radial whitewall QRN GR70-15 Radials QRV HR70-15 Radials QRZ GR70-15 Radial White Letter TO7 7.75-14 W/W tires T15 7.75-15 8 Ply tires T58 Rear wheel skirts, wow. (Monte Carlo) T60 Heavy Duty Battery UA1 Heavy Duty Battery UM1 AM radio with tape, '70+ UM2 AM/FM with tape UO3 Low note horn, D. UO5 Dual horns UF1= Mirror Lamp (available in '70-'72). UF7 Econominder Gauge package U14 Instrumentation package U15 Speed Warning Indicator, '67+ U16 Tachometer U17 Cluster INST (Oil coolent,AMM, Clock, Gas, Tach) U18 Export Speedometer U25 Trunk Light U26 Underhood Light U27 Glove box Light U28 Ash Tray Light U29 Instrument Panel Courtesy Lighting U35 Clock U46 Lamp Monitoring Equipment U57 8 Track Tape Player U58 AM/FM U60 Manual radio U63 Basic old AM radio U69 AM/FM radio with buttons. U73 Manual Rear Antenna U75 Power Rear Antenna U76 Antenna in windshield U79 Stereo Equipment U80 Rear Speaker VE5 Deluxe bumper strips VO1 Heavy Duty Radiator VO2 Heavy Duty Radiator, '64 V30 Bumper Guards. Full set. -Front only bumper guards on El Camino / GMC Sprint. (El Camino / GMC Sprint never came with rear bumper guards). V31 Front Bumper Guards, '64-70 V32 Rear Bumper Guards, '64-70 V55 Roof Rack V74 Hazard Warning Equipment, '66. V75 Traction Dispenser set-up. W84 Additional fuel for delivery X11 Style Trim for base car or SS X22 Style Trim for SS with 396 X33 Style Trim for Z/28 or RS with Z/28 option X44 Base Car X55 Base SS with 350 X66 Base SS with 396 X77 '69 Z-28 camaro Norwood OH cars only YB5 General Processing Option (beats me?) YD1 Trailoring Axle YE7 *Special Performance "SP" package ('71-'72 GMC Sprint). . YF3 The Heavy Chevy Package YF5 Emission Tested YJ9 Exterior dress 'emup package Z10 has something to do with a special hardtop pace car Z11 ('69 only) Indy pace car accents Z21 Style trim group Z22 Rally Sport Z23 Special interior package Z27 SS equipment Z28 Special performance package Z87 Custom Interior group ZO1 Comfort and Convenience Group, '64-65. ZO2 Pushbutton Radio and extra speaker, '64. ZO4 Heavy Duty Chassis, '64-65. ZO8 Body Molding/Trim ZJ7 Ralley Wheels ZJ9 Auxiliary lighting group ZJ6 Special Sport Sedan, '68+ ZJ7 Steering Wheel Deluxe Trim ZJ9 Auxiliary Lighting Group ZK3 Deluxe Seat Belts, and Front Shoulder Harness, '68+ ZK5 Concours Sedan, '68 ZK6, 7 Concours Sport Coupe, '68 ZK8 - Refers toTire Pressure Label, '70 ZKQ - tire pressure sticker ZL2 Special Hood, Cowl Induction, '70+ ZL3 SS 396 CONVER-- ZO9 Performance Rear Axle, '70+ Z10 Pace car coupe Z11 Indy pace car convertible ZP2 *Trim & color override. This was for cars that had an exterior/interior color or trim combination that was not normally available. This code is listed on the build sheet for a '71 GMC Sprint that was "Classic Copper" with a "Dark Saddle" interior - a color combination not normally available. ZR3 Refers to: = Off road package 454(LS7 & LT2) 69* Z02 refers to: **SPEC PAINT** (from 72 tag) ZP5 *Appearance guard group. ZW4 *Std Trans 3spd (70) Z13 Comfort and Convenience Group, second style, '64-65. Z14* Refers to: = A/C BODY CONV (info from 72 Chevelle) Z15 SS equipment. (454 in '70) Z16 Special Sport Coupe - 65 Chevelle Z19 Convenience Group, '66. Z20 Monte Carlo SS 454 Z25 Super Sport Option, '69+ Z29 Vinyl Stripe Z49 Canadian Base Equipment Z57 Vinyl Coated Trim Z83 Road Hazard Package, '66. Z95 Regular Fuel Engine Equipment W=tinted windshield X=power windows L=folddown seat D=power top E=All glass tinted M=powerglide G=center console L=4 speed manual F=A/C B=3 speed manual on floor S=rear antenna U=8 track multiplex R=rear speaker S= Z-23 interior L= Z-22 (RS) K= Z-21 style trim B= rear window defroster D=clock and/or gages Engine codes SS350= P SS396/325hp= N SS396/375hp= K Body VIN: The Vehicle Identification Number of your car. From '53 to '60, it is in the driver's side door jam. From '60 to '62, it is on the steering column in the engine compartment. From '63 to '67, it is under the glove box. From '68 to '03, it is in the driver's side windshield pillar. Engine Casting Number: The part number cast into the block when made. Casting Date: The date of the casting of the block. Partial VIN: Stamped on the engine pad located in front of the right head. An engine identifier is also stamped here. Bellhousing Casting Number: The part number cast into the right side near starter. Transmission Casting Number Part Number cast into the case and tailshaft when made. Date code Usually the casting date is in the body but this is the case date. The assembly date is stamped in as part of identifier code. Partial VIN Stamped along top of mounting ear in some, along joint of main case, or on a raised pad in the main body (newer T-10). Rear End Date code Cast in drivers side of housing for the case of '63-'79. In straight axle '53 to '62 Corvettes, the identifier is stamped on the front right side. In the IRS, the assembly date is stamped in identifier on the bottom flange. Gear ratio Stamped in bottom flange as part of identifier as a letter code, such as AW. Alternator/Generator Part Number Stamped on top with date and amperage rating. Date Code Stamped on top along with amperage rating and part number. Water Pump Casting Number Casting Date Code Cast on front of the pump. Radiator Part Number Stamped in aluminum, embossed in copper. Date Code Stamped in Aluminum. Distributor Part number Stamped in aluminum housings and embossed on a tag on iron units. Date Code Same as Part Number Window Glass Date Codes Each window has its own as part of the marking. Carburetor Date Code Either on brass tag or stamped in air horn or body, depending on the carb. Part Number Either on brass tag or stamped into air horn or body, depending on the carb. Fuel Injection '57-'65 Part Number Stamped on a metal tag on the left front of the plenum. Date Code Serial Number Stamped on side of Plenum for the first hundred or so in 1957 and then were stamped on the metal tag. The serial number does not have to correspond to the car's serial number. Heads Casting Number Usually cast on top under rocker arms. Date Code Usually cast on top under rocker arms. Casting Numbers: When a part is cast, the mold has a part number and a date code set so that it is part of the mold and the part is forever identified. Most older Corvette parts such as heads, blocks, and manifolds, usually have a 7 digit casting number beginning with 3 to identify the part. Engine Block: On most blocks, the casting number is located on the bellhousing flange behind the driver's side head. The casting number does not usually correspond to any engine part number as the engine part number is for the assembly, not the casting. Cylinder Heads: The casting number is usually in the area under the rocker arms. Years of baked oil may fill the numbers to make them hard to read. On some heads, partial numbers were found on the intake runners on the block side, such as the 461 and 462 heads. Intake Manifolds: Usually on the rear runner on top. Exhaust Manifolds: Usually on the outside of the manifold. Small block Ram Horn manifolds usually have this on your left as you view them. The big block manifolds are down the side. Transmission Casting: The numbers are on both the main body and the tailshaft housing, usually on the right side. Rear End: The casting number is located on the right side near the prop shaft. Water Pump: The casting number is on the front of the body. Date Codes and Where Are They? Almost every mechanical part made for a Corvette has a date code, either cast or stamped into it. These simply identify when the part was made. To the factory, this date probably made sure that they didn't leave any stock laying on the shelf too long, although if you have ever watched any factory production line run, it is doubtful if anyone ever reads the dates. The purpose of the date to Chevrolet was probably to ensure a means to track any defects should they arise. If a part dated March 3 and one dated March 21 were both defective, attention could be paid to those parts built between those dates for other possible defects. Today, these are used to determine if the part is correct for that Corvette, as an engine with a date code of D 16 5 (April 16, 1965) could not be correct for a '63 Corvette as the engine was made after the car was made. Parts too early are usually not correct either, as they would have been installed on an earlier vehicle, such as a B 23 3 (Feb. 23, 1963) in a '67 Corvette. NCRS provides a window of 6 months on date codes prior to the build date of the car. Obviously, a part on a car could not have been made AFTER the car was made._ But given how new items were constantly loaded on shelves, with existing items being shoved further back each time, a part could sit for many months before being assembled on a car. Usually, the parts were used within a few days or weeks but there are many documented original cars that have parts several months old. Be sure to notice that some parts have both a casting and a stamped date code. These can be several days apart. The stamped date code is when the part was assembled and should be the one considered. Engine Block: The date code on a SBC is typically on the bellhousing flange behind the distributor. On early big blocks, it was on the passenger side near the pan rail, but later (1970) moved up to the same location as the SBC. Usually the date is given as a letter, a number and then a number, such as B 23 3 which is for February 23, 1963. With any engine still having ignition shielding on, you have a very hard time to see the date. A good flashlight and a wire brush to clean any dirt are a must, even with the shielding removed. Cylinder Heads: The date code is located on top under the rocker arms. You must remove the valve covers to see them. Often lead deposits in old engines have filled the numbers and letters so they are hard to read. Often the rockers are in the way. Intake Manifold: The small block usually has the date on the driver's side rear runner. The date is typically below the casting part number. The firing order (18436572) is usually cast on the front runner so do not confuse it with the part number. Some big block intakes have the date cast under the intake so that you must have the intake off the engine to see it._ Exhaust Manifolds: Usually on the outside of the manifold. Small block Ram Horn manifolds usually have this on your left as you view them. The big block manifolds are down the side. Transmission Casting: The numbers are on both the main body and the tailshaft housing, usually on the right side. Rear End: The casting number is located on the right side near the prop shaft. Water Pump: The casting number is on the front of the body. Date Codes and Where Are They? Almost every mechanical part made for a Chevrolet has a date code, either cast or stamped into it. These simply identify when the part was made. To the factory, this date probably made sure that they didn't leave any stock laying on the shelf too long, although if you have ever watched any factory production line run, it is doubtful if anyone ever reads the dates. The purpose of the date to Chevrolet was probably to ensure a means to track any defects should they arise. If a part dated March 3 and one dated March 21 were both defective, attention could be paid to those parts built between those dates for other possible defects. Today, these are used to determine if the part is correct for that Chevrolet , as an engine with a date code of D 16 5 (April 16, 1965) could not be correct for a '63 Chevrolet as the engine was made after the car was made. Parts too early are usually not correct either, as they would have been installed on an earlier vehicle, such as a B 23 3 (Feb. 23, 1963) in a '67 Corvette. NCRS provides a window of 6 months on date codes prior to the build date of the car. Obviously, a part on a car could not have been made AFTER the car was made._ But given how new items were constantly loaded on shelves, with existing items being shoved further back each time, a part could sit for many months before being assembled on a car. Usually, the parts were used within a few days or weeks but there are many documented original cars that have parts several months old. Be sure to notice that some parts have both a casting and a stamped date code. These can be several days apart. The stamped date code is when the part was assembled and should be the one considered. Engine Block: The date code on a SBC is typically on the bellhousing flange behind the distributor. On early big blocks, it was on the passenger side near the pan rail, but later (1970) moved up to the same location as the SBC. Usually the date is given as a letter, a number and then a number, such as B 23 3 which is for February 23, 1963. With any engine still having ignition shielding on, you have a very hard time to see the date. A good flashlight and a wire brush to clean any dirt are a must, even with the shielding removed. Cylinder Heads: The date code is located on top under the rocker arms. You must remove the valve covers to see them. Often lead deposits in old engines have filled the numbers and letters so they are hard to read. Often the rockers are in the way. Intake Manifold: The small block usually has the date on the driver's side rear runner. The date is typically below the casting part number. The firing order (18436572) is usually cast on the front runner so do not confuse it with the part number. Some big block intakes have the date cast under the intake so that you must have the intake off the engine to see it. Exhaust Manifolds: The casting numbers on the Ram horn manifolds are on the outside near the 1-3 or 6-8 cylinders. On the big block manifolds, it is found low near the outlet. The date codes on the Ram Horn manifolds are found on the opposite end. On the big block manifolds, the date code is found on the back side. Transmission: The Borg Warner transmission has a date cast into the main body and tailshaft in the early T10s. Some later T10s ('70s) have it also. Usually it is found on the passenger side. The Muncie has a date cast on the tailshaft. Unfortunately, these casting dates are the ones that the castings were made, not the transmission. A stamped number usually contains an assembly date. Rear end housingThe housing for the 1963 to 1979 differential has a casting date on the drivers side. Again, this is the case date code. The assembly date is stamped in the bottom of the case on the lip where the cover mates. Alternator: The date code is stamped into the housing. Water Pump: The water pump has a date code cast into the body in the front but the pulley must be removed to see it usually. Carburetor: Most of the earlier carburetors were built by Carter and had an identifier tag attached to a cover bolt. This tag had the part number and date code. On Holley carbs, the List Number is stamped on the drivers side air horn in front along with either a 3 digit or 4 digit date code. The Rochester QuadraJet has a stamped number on the driver's side on a vertical pad Build sheets are a small strip of paper, about 2 inches wide by 8 inches long or a square about 5 inches by 7 inches that is usually buried in the cotton stuffing of the rear seat, in the backrest of the front seat, or drivers bucket. If you are lucky enough to find this, (the mice usually have other plans for it) then photocopy it immediately and put it back, the last thing you want is to lose it after having it right under your butt for so long. If you make a copy and replace it you are ensuring that the next guy (hey, we all know you plan on keeping this one forever!) can enjoy the thrill of "finding" this original documentation. Build sheets usually confirm what the Cowl tag will tell you, but in more depth. Build sheets consist of the following information: The model number, starts with 1 followed by 4 or more numbers.eg 12467. A pair of letters will designate the paint code. A three number series will designate the interior. A series of one letter and two numbers indicates the factory installed_ options.

I have the two upper corner pieces. They came with the car when I bought it. They are made from stainless and look fantastic. What I am looking for is the two long aluminum pieces that run the length of the black panel. I think that part number I was looking at in the Classic Muscle catalog is what I need. I will check the parts place too. Thanks all.

Does anyone know if the 2 long brushed aluminum trim pieces that outline the black panel below the rear deck lid on a 71 SS are reproduced by anyone? Classic Muscle has a description in their catalog that reads "70-71 #8700088 Monte Carlo Rear Panel Molding 2 req. $59.95 ea". I been to their web site and punched in the part number but there is no pic for it. Is this what I am looking for?

Correect me if I'm wrong but were'nt the air ride compressors for the Montes always a flat black from the factory.

Thats would be right. I dosen't do anything after the pop up window leaves the screen. The computer is just sitting there. I can launch IE or do anything else I want.

Hmmm...I got to step 3 "Disc Cleanup". The first thing it does is it calculates how much space I will regain by performing disc cleanup and it says 93K. Then I click on the OK button and a pop up ask "are you sure you want to perform disc cleanup?" I say yes and then I get another pop up which is a progress bar and it says it is performing disc cleanup. After about 5 seconds the progress bar pop up leaves the screen. It is not minimzed to the tray it is just gone and nothing happens. Now what does that mean?

Wow Thanks Allan for the great write up. I have printed it out so I have it to refer to while going through all the steps. Will this process delete passwords for paypal and message boards or other sites where I use a password?

Do these programs work? Our computer has really slowed down and every so often we have to have it cleaned up. It is really slow now since my sons computer crashed and now he uses mine to go to facebook and all the other community sites. I looked at a Fix It utilities program at Best Buy for like 30 bucks that says it will clean your computer up and keep it running fast. I already have a security suite provided by my isp that does seem to work. It will always find 11 to 15 infected files when it runs it scheduled scan. I guess I always viewed those programs the same way I view all these engine fixes in a can. Usually don't work and can do more harm in the long run. So if anyone has experience using these utilitys which do you recommend?

Nate, Look at the image of the build sheet I sent you for my 71 SS. In the list of options it lists: *S1D Dual Exhaust So it is not automatically rolled into the Z20 Monte Carlo SS option?? Information that is included and or omitted seems to vary not only from plant to plant but from individual build sheet to individual build sheet. If there is any way I can assist in the formation of the build sheet data base let me know.