dmdbit

I would have to say yes,I wish I had.Reply with the cam specs and rear axle ratio and you will receive some good opinions you can choose from. mike b

Over a year ago I put a too mild 468 in my car in place of a 350.I rebuilt the t350 at the time with a shift and used it.I put new motor mounts on the block for a 454 and it dropped right on the small block mounts.Other than accessory brackets on the motor it is truly a bolt in and go.Crossmember location is the same meaning the driveshaft is reused as well. mike b

Are those heads the same as the edelbrock ovals?I thought I read that somewhere but can't remember for sure.Brodix has some new aluminum ovals that flow really well but like the AFR's are really expensive. mike b

Mc350 One thing to remember is that as dwell changes this has an effect on timing.Set your dwell at as papa joe mentioned and then set your timing. mike b

Mike is right the starters are different.In having owned both a 4spd and an auto monte the starters are different. mike b