Jump to content

jcakes

(Non-dues paying)
  • Posts

    23
  • Joined

  • Last visited

  • Days Won

    1

jcakes last won the day on December 30 2020

jcakes had the most liked content!

Reputation

10 Good

Profile Information

  • Location
    SE PA
  • Legal Name
    John
  • Occupation
    Real Estate

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. man, I'd sit outside with a beer and stare at that all day. Beautiful.
  2. I agree with cny first gen 71, it can look nice, but the difference isn't worth the effort involved. I've always used Collinite 845 as my last-wax-of-the-fall coating to protect the paint from the salty roads over the winter. It's still not the easiest wax to use, but it's easier than ceramic in my opinion. Seems to last for months for me, and that's on my driveway-parked daily drivers. It's not expensive and a bottle will last multiple years. It won't fix the orange peel, but if you get the paint corrected and then do the Collinite, you'll be able to swim in that black hood.
  3. Ooofa. No stop leak as far as I know...certainly not by me. Actually, aside from a little rust discoloration, it was pretty decent looking coolant. What are the nicks in the block around the F/O plug holes? I am assuming all of these plugs in mine are steel and possibly even original, since I never replaced them, so that makes them at least 25 years old. And if one is gone, I think I'll feel safer thinking the rest aren't far behind. This whole thing is going to be a slow process, so I'm OK with yanking the engine for a full freshen up, and replacing the freeze out plugs made that decision easier for me to make. I may just prioritize some suspension work while I've got the weight still in there.
  4. I appreciate your input (and everybody's); it's me putting ideas out there and being able to talk them through and consider options and consequences that I wouldn't otherwise by myself. This car obviously had A/C at one point, but I got it sans compressor, so it was always a 4/60 system for me. I was also 17, so much more resilient (and broker) than I am now. It's not a decision I'd make lightly either way. I remember seeing a brake booster that was capable of being mounted lower on the firewall. This was also a long time ago and something I haven't put a ton of research into, but in my 20-years-ago mind, I wanted to drop the brake booster lower and ditch the A/C box and get that symmetry back that way. With the steering linkage and long tube headers, I'm not sure it's realistic though. Either way, I need to figure out where the coolant is coming from first, and move on from there. It continued to drain last night long after I shut her down. I'm thinking that the thermostat may have been stuck open as I didn't replace it and definitely didn't run it long enough to open it if it was good. It was a decent 50/50 mix too, so I'm hoping the plug just corroded out vs a deep freeze, especially since she was garage kept. Makes me worry about the others now too though.
  5. Better than expected! After a 20 year slumber, she fired right back up and sounds like I just parked her yesterday. No knocks, ticks or clunks. A few seconds for the fuel to get through the pump, and it just idled like normal. So stoked. I do, however, have a major coolant leak on the passenger side. It's hard to see because of the starter, but I'm hoping it's just a freeze plug and not a head gasket. The oil is fresh, so I'll check that to see if it's contaminated at all. A preliminary 'feel-around' leads me to believe it was a freeze plug though, and I know I never replaced them. It's still in there, but the majority of the water felt like it was coming from around there and pooling in the plug itself and it didn't seem wet above that. Now I just need to figure out where to go next. Obviously the leak. Thinking I should freshen up the entire fuel system up to the pump. Suspension is absolute garbage and will need to be addressed before she's road worthy again, as well as brakes. LOTS of body work (rust, likely rear end hit from before I got her) and the wires...omg the wires make me insane. I'll need to trace and ID every one if only for my own sanity. And the A/C box. I'm not worried about A/C yet, and the box is in the way. I'd eventually like a clean firewall look, but will keep everything aside for if I change my mind. Thank you all for your help and words of support!
  6. Real estate guy here...take me with a grain of salt. But it seems conservative? Based on your current setup and planned upgrades, will it seem a little too safe? Again though, I'm not an engine builder and have only gleaned what little knowledge I have from old engine building books and build shows, so I'm more or less trying to get this post to the top to move the conversation along and learn something myself. As someone running a 327, I hear you on being different! Good luck!
  7. OK...this is what I'm learning elsewhere as well. Dropped the distributor back in place and all of my index marks lined up. Replaced some hoses and am going to pull fuel from a remote source like mentioned above and not even bother with the tank or old lines. Now it's just a matter of pulling it out of the garage and bribing a friend or two to come over and hold some fire extinguishers so I can turn her over with a little peace of mind. Thank you.
  8. I'm back. It's been awhile and a snail's pace slog, but I'm getting there. Since it's been so long and I don't want to blow up the engine on the eventual restart, I'm in the process of priming the oil pump. I'm using and oil pump primer tool and have seen some signs of good results. I'm getting oil pressure and I've got the entire driver side bank to give me oil. I am NOT getting oil from the passenger side, with the exception of the #6 exhaust rocker. I read through the internet a little, and it seems like the offset on the priming tool makes a difference. I double checked it against my distributor, and the offsets look the same. What am I missing?
  9. Not there yet. All the normal excuses...work, kids, other priorities. I'm still hoping to do this soon though. I'm itching to hear her again.
  10. Curiosity got the best of me, so I removed the mechanism and tumbler. After I got the (3) bolts for the latch mechanism itself out, I felt that bar/rod and tried to see where it would go and what it would do by gently moving it around. In the process, the spring fell out but so did something else. It's kind of hard to see, but it looks like the backside of the tumbler broke. Not sure when, but the break itself looks like clean metal, so I wonder if I did it? I also tried the square key one more time to see if something was stuck in the tumbler, and it goes pretty far in. So in the end, this wasn't a properly functioning lock to one degree or another, but I'm still unsure if there's a key stuck in there. Perhaps this just widens the scope of 'when you can open the trunk from the backside' to include, the tumbler is broken in some way? When I finally get around to replacing the tumbler and mechanism, I will definitely try this again. Now I want to know for sure when it will and when it won't work and why.
  11. What if it's an updated HEI/non-points distributor? Is this still a concern with a simple cap and rotor change? Either way, I need a timing light, so now seems like the time to get it.
  12. I'm not a mechanic, so please don't take my question as doubting you, but, if I mark everything and reassemble it so that everything goes back in place just like it came out, that wouldn't effect timing, right? Thank you to everyone who has answered thus far. I really appreciate the hand holding during this. As for the fuel, it seems as though the effort outweighs the cost with the fuel system. My intent is to start it with a secondary fuel source just to establish that she'll run again. Once I've done that, my plan is to just replace the tank and fuel lines and start fresh. Also, this (the initial restart) will all happen outside, with a trusted friend/extinguisher operator and away from my house or other cars. I do appreciate the concern though...sometimes we overlook things in our haste and it's good to be reminded not to do so.
  13. Now that I've got my car back, I'd like to hear her run again. It's been 20 years since this motor has run though. Other than a little fuel stabilizer (20 years ago), this car was parked in a garage in running condition and then left to sit. I'm working with a 327. Block #3858180, heads #3872461 (early 60's vintage camel-humps), Edelbrock electric choke 600cfm (P/N 1406). As far as I know, all of the internals are original (but ran great before she was parked). I haven't done anything yet but research. Here's what I think I'm supposed to do. Bar the engine over. I did this a few degrees just to see if it moved (and it did), but I haven't gone a full rotation yet to check for binding. Refresh the carb. The kit from Edelbrock was inexpensive, so I'm throwing P/N 1477 at it. Remove old spark plugs Give each cylinder a few mls of Marvel Mystery Oil New spark plugs Cap and rotor Change the oil Drain and swap out the coolant Replace thermostat Replace spark plug wires Prime the oil pump Replace the battery Have a charged fire extinguisher handy Let 'er rip? A few preliminary questions: How does this look for an order of operations? What would you add or subtract? How do I best get fuel to the carb without doing the inevitable fuel system rebuild now? Can I just run a line into a fuel can from the mechanical fuel pump? I'd like to get it up to operating temperature as well as long as it all sounds good. Should I disconnect the electric choke on the carb and how? Is it just a matter of removing the electric connection? I don't want to be turning too high of an RPM at first start, and I'm afraid that if the choke is in fact fully operational after 20 years, it's going to try and run the RPMs up. This is what I have so far, and I'm nearing paralysis from analysis. What have you done in the past that did or didn't work? What would you change? What am I overlooking? Thank you all again in advance for your help.
  14. Hmmm...I'll have to try and remember to update when I figure it out. The lock cylinder isn't high on my priority list right now, so it may be awhile. With the whole square vs round key question, I tried the square one in the trunk lock for S's and giggles, and I didn't feel anything stopping me other than it wasn't the correct key. I don't remember it ever breaking off in there. It was functional when I drove it and AKAIK, no one else broke one off in there, but we'll have to see. It's been two decades after all...who knows!
×
×
  • Create New...