Tmac

Just a tip ya'll probably know but..... I ruined a set of rocker panel moldings using these spider looking clips on the right. Contacted Leo @Koniks Klassics to get a new set and he sent me these white plastic ones. Installed in minutes and they work great! Thanks Leo!!!

Ist time in a year and a half it moves under its own power again!!!! Thanks to everyone here for the advice and tech support couldnt have done it without the help!!! received_1876493939469489.mp4

I did order the Fusick ones, cheaper and the shipping was 1/2 as much also.

correct. i believe they only have 2 clips and i think the Monte has 3?

Jst FYI Joes' link did lead me to a suitable replacement for the inners. Softseal SS-5023. First Place auto parts had them in stock. i think they are for a Skylark. Thanks for the help.

Thanks!

I am going to try koniks today. Joe gave me a link to the inners, now I'm just trying to get my best deal. i need a few other things so shooting for best shipping cost.

what is everybody using for the inner seal?

is there one that goes on the inside as well?

Great news! hate getting it done, but i'm still here because of it!!!

I am trying to find these quarter window seals and and i don't really know what i am looking for (proper name i guess is the problem.) if you can not tell from the pics, (horrible photographer) it is the rear outer quarter window seal. i am looking for them but not feeling confident with the little/poor pics provided on the sites im looking. tired of ordering and shipping twice to get the right part. Sooooo any help /part number/vendor would be appreciated..

Awesome pics! That's how I've got mine mocked up right now. My instructions said I could switch the charge port and cycling switch if I needed to make room. I'm gonna leave it just like yours. Thanks again!!!

Thanks, I like how yours looks, really clean. Do your instructions say anything about the clutch cycling switch? It says it can go on either port on the POA eliminate but it doesn't say if you should remove the schrader valve from the port.

I guess to add to this: is there a different style hose to use?

I got my new A/C components this week and am test fitting everything. It is from Original air Group/Classic Auto Air looks like good stuff and i have heard good stuff about them at different shows and with talking to Joe. NO instructions and gotta wait for Monday for some other tech support, but i am not happy how my hoses, off the compressor, are routed and was wondering if anyone had any pics of how they did theirs? It just doesn't look good to me. also concerened about being able to tighten the compressor belt and , of course, keeping with the hose length i have. Thanks!

lol! my head barely has ears soooooo.......

yeah that's what i need. kind thinking about just doin kick panels and being done. i dont know.

I put my dash pad in my 70 today and i do not like the way it fits over the dash speakers. They are aftermarket 3x5 ish and set way to high and the drivers side i had to leave the dash out a little because the magnet pinches against the gauge cluster. ( i remember it was like this when i tore it apart and i half wondered why) so you can see the dash pad thru the windshield doesn't fit right. Thinking about eliminating these and putting in new kick panels with speakers in them. Any suggestions, problems, tips? it is a factory AC car.

So here is my solution: I did find an older auto glass place and they recommended the glass setting tape or the liquid glass setting stuff like willie suggested. I did try the inner tube idea but mine was way to thick. I did the whole measurement routine to find the tape thickness i needed and came up with 1/32. so i ordered these from Summit: Worked very well, good snug fit but didn't have to fight to hard. The 1/16 tape im going to use under the drip edge?? that holds the large window seal to seal it up to the roof. Tip: my windows were already installed and i feel it would have been alot easier to put it on while the window was on the bench, then put the big rubber window seal on after the window was installed in the car. Thanks for all the help and ideas!

Congrats!! that's pretty cool honor!!!

It does! i will search out a glass shop and see if i can purchase something like that from them.

Willie, is that the butyl tape your talking about or actual black silicone?

any suggestions on a seal material that goes in the chrome channel between the chrome and the window itself? I have found rolls of glass setting tape but it seems that there are way to many different thicknesses to choose from! if anyone has used this stuff or has a better idea let me know. I was looking for the pre-molded channel that goes in there but i could only find it in a $90 set that includes the chrome trim and i don't need the chrome.

I was wondering why the difference. i ordered the correct set and am much happier with these.

Ok I'll take a look. Thanks!