Jump to content

maddmann313

(Non-dues paying)
  • Posts

    120
  • Joined

  • Last visited

Reputation

0 Neutral

About maddmann313

  • Birthday 11/29/1993

Profile Information

  • Location
    North Carolina

Profile Fields

  • Brass Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yes it is the stick oil pump.
  2. What would cause my 1972 monte Carlo to have only 20-40 psi of oil pressure? I checked the oil and it's fine... It's a 350 sb
  3. Mine altogether for all the bulbs was like $25 from super bright LEDs .... I got them in the mail today so time to re assemble.... Got the cool white LEDs to match the led in my dome lamp
  4. Well what lights out idiot lights red when they light up? Do u need to get different colors for those idiot lights?
  5. How did u get just that part out?
  6. How many and where are the bulbs in the instrument panel any one have a picture? It a 1972 monte with a printed circuit bord!
  7. Im getting mine from www.superbirghtleds.com
  8. how hard would it be to convert my instruments pannel to leds? what kind/size bulbs would I have to buy?
  9. The timing is the only thing I lack of getting my car on the road again! From what I understand you have a intake TDC and exauhst TDC... Which does it need to be on? And if it's not on that TDC what are some affects it has?
  10. Carb was rebuilt and the car now runs but the idle is very high and the motor is making a loud clicking noise! Is it the rocker arms loose or are the valves and pistons hitting?
  11. well I got it in the right spot, but i just found out that the carb is leaking fuel everywhere. Im taking it to a friend of mine to get it rebuilt!
  12. Thanks, that time it was fine. I haven't tried this yet but now i turned the distributor around until it was 180 out and then it started backfiring through the exhaust
  13. Well I moved it around to where it points to the number 1 cylinder on TDC! Well no it's starting, but it's back firing very badly and it sounds like its missing, and will not stay running on its own
  14. Wel when I pulled it the rotor button was facing the #1 cylinde and now it's pointing at the back of the carb! Could I just pick it up and turn it back to the left?
×
×
  • Create New...