Jump to content

keys and locks


Guest

Recommended Posts

i couldn't figure which forum to put this under so here it's in here.

 

i got a 70 for free, the problems were why...no engine, no trans and no keys to start with. got a 350 and a turbo 350 now i needs keys. those out there who have replaced them, is there a better deal than this from old car network? please let me know, would like to order tomorrow.

 

thanks in advance and sorry i got long winded.

 

matt

 

http://www.oldcarnetwork.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=KK26046

Link to comment
Share on other sites

Matt

My brother-in-law is a locksmith and he says that they printed the key code for the lock on the lock its self! If you take out the door lock out and get the code off it, it would cost about $12.00 for two keys cut by the code. If the code is not on the cylinder, you could send me the lock he would take it apart and then cut key to the lock according to the pins in the lock! That would only cost a couple of dollars more. Same thing goes for the Trunk / glove box keys!! You can e-mail me at bkjacobson@wiktel.com if you want more info.

GOOD LUCK - Brian

Link to comment
Share on other sites

×
×
  • Create New...