snomobeelr Posted April 17, 2016 Share Posted April 17, 2016 So I had car running and braking. Over winter Changing to hydro-boost. The Master Cylinder has been siting on my bench upright never opened the lid on it since I removed from car. It never leaked a drop out the brake line fittings. I was going to mount it back into the car and figured I might as well bench bleed it since it is off the car and flush the fluid. I had the Master cylinder in the vise. I popped off the lid off off it and the fluid stated coming - streaming out the Brake line fittings. Is this just normal from opening the lid. I dont remember if this is normal or if the Master is bad? Thanks Quote Link to comment Share on other sites More sharing options...
Sam (Bones) Posted April 17, 2016 Share Posted April 17, 2016 normal, when you removed the lid, it allows air in and the fluid to drain show your lid had a good seal not allowing air in or leaking Quote Link to comment Share on other sites More sharing options...
snomobeelr Posted April 17, 2016 Author Share Posted April 17, 2016 Cool . Thanks Sam !! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.