Jared Richey Posted January 4, 2019 Share Posted January 4, 2019 I'm putting the call out again for a set of preferably used SS 71 rear hockey sticks. I want to put these in the hands of a few people in this area who have the equipment to make something like this. I currently have them on one of my cars but as any that is familiar would know it's an act of Congress to take them off. I do not want to be responsible for any NOS ones... Prefer a used set to use. I would be willing to buy a set if the price is right... Or buy them with the agreement that when I'm done with them you can buy them back for the same amount. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted January 6, 2019 Share Posted January 6, 2019 I talked to someone at the Parts Place and they were going to have there supplier manufactor the upper mouldings but I don't see them listed Quote Link to comment Share on other sites More sharing options...
Monteman1971 Posted January 10, 2019 Share Posted January 10, 2019 I'll agree.....way too much work to take them off....... hopefully someone will come up with a set for you Jared. Mine are in good shape but put me down for a new set once you get this done! Steve Quote Link to comment Share on other sites More sharing options...
orbit Posted January 11, 2019 Share Posted January 11, 2019 Jared Put me down for a new set as well Joe Quote Link to comment Share on other sites More sharing options...
SPLATT71MC Posted January 13, 2019 Share Posted January 13, 2019 Hockey sticks? Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted January 13, 2019 Share Posted January 13, 2019 The "hockey sticks" are on a 71 SS car. They are on the back tail panel, on the end caps above the normal trim pieces. The panel is then blacked out between the trim. They look like the lower end cap trim only bent with a tighter curve and are held on with a nut on a stud opposed to screws for the lower pieces. Actually they look like this, off the car..... Quote Link to comment Share on other sites More sharing options...
714024SPEED Posted January 13, 2019 Share Posted January 13, 2019 The hockey sticks is the small trim piece that bolts to the end cap on 1971 SS .top piece in picture Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted January 13, 2019 Author Share Posted January 13, 2019 On 1/6/2019 at 11:22 AM, 1970mcss said: I talked to someone at the Parts Place and they were going to have there supplier manufactor the upper mouldings but I don't see them listed Can you call whoever you talked to and verify? If there going to mass produce that would be good. Hopefully they make them out of stainless. Quote Link to comment Share on other sites More sharing options...
willie Posted January 13, 2019 Share Posted January 13, 2019 Jared do you need both? I think I have one still attached to a piece not attached to a car, I have to check. Give me a day or so and I will get back to you. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted January 13, 2019 Share Posted January 13, 2019 Jared, I think it has Joe the owner. He was going to figure out the measurement of the stud location and talk to the people that produce the lower mouldings. I have a 70 so Never followed up. You might want to call them and ask. Good luck and keep us posted... Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted January 14, 2019 Author Share Posted January 14, 2019 Ok. Willie, 1 might work, I think it's a flip copy anyway. Thanks Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted January 14, 2019 Author Share Posted January 14, 2019 I just sent the parts place a message Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted January 14, 2019 Share Posted January 14, 2019 Not a flip copy. Look at the pics I posted. Especially of the pair. They are left and right specific and have different part numbers for each. Also hard to see but the studs on the back are in slightly different locations . Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted January 17, 2019 Author Share Posted January 17, 2019 My response from the parts place... We currently are in the process of making them, please contact us back again on the matter in a few weeks and we may have an update. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted January 18, 2019 Share Posted January 18, 2019 It will be interesting to see what they come up with Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted January 24, 2019 Author Share Posted January 24, 2019 For sure Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted March 18, 2019 Author Share Posted March 18, 2019 Just sent them another message not quite available yet but says will be available shortly!! Quote Link to comment Share on other sites More sharing options...
MC-71 Posted April 11, 2019 Share Posted April 11, 2019 Any word yet Jared? Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted April 19, 2019 Author Share Posted April 19, 2019 No but I just seen your post I'm going to send them another message. Quote Link to comment Share on other sites More sharing options...
Nancy Hanson Posted July 17, 2019 Share Posted July 17, 2019 Any word from the Parts Place? Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted July 18, 2019 Author Share Posted July 18, 2019 I have not heard back it's been a few months so I need to send another email. if it's like other new parts it always takes three times as long. Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted August 16, 2019 Author Share Posted August 16, 2019 Just sent them another message they said they are almost in stock to check back in a couple of weeks! Quote Link to comment Share on other sites More sharing options...
Nancy Hanson Posted September 3, 2019 Share Posted September 3, 2019 Any news from the Parts Place yet? Quote Link to comment Share on other sites More sharing options...
Jared Richey Posted September 13, 2019 Author Share Posted September 13, 2019 I would call them Quote Link to comment Share on other sites More sharing options...
Nancy Hanson Posted September 15, 2019 Share Posted September 15, 2019 I keep emailing them but they never answer. Thanks, Carl Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.