Mike Brichta Posted December 7, 2020 Share Posted December 7, 2020 Well, after some sand blasting, I see that the windshield pillar on my 70 El Camino might need some repair. I believe the pillars are the same for El Caminos, Montes and Chevelles. Has anyone replaced theirs before? Is there someone out there that makes a replacement part for the pillars? Thanks!! Mike Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted December 7, 2020 Share Posted December 7, 2020 Check with Belden speed engineering they may. Quote Link to comment Share on other sites More sharing options...
72RustBucket Posted December 7, 2020 Share Posted December 7, 2020 19 minutes ago, cny first gen 71 said: Check with Belden speed engineering they may. https://www.rustreplace.com/home/1970-1972-monte-carlo Not sure if they make the whole thing for the front, but they do for the back Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted December 7, 2020 Share Posted December 7, 2020 You are correct that the Chevelle, Monte Carlo parts are the same. So are any non convertible GM a-bodys from 68-72. ir cutlass, lemans, 442, gto, skylark,GS and the such. I would try joevega, azchevies he usually has a few clean cut out examples. Quote Link to comment Share on other sites More sharing options...
Mike Brichta Posted December 8, 2020 Author Share Posted December 8, 2020 Thanks guys!! My search continues... Quote Link to comment Share on other sites More sharing options...
jft69z Posted December 8, 2020 Share Posted December 8, 2020 Looks like Belden recently added the front repair parts for the 66-67 A bodies. As Steve said, worth a call to them, they may already have some, or can make some for you. https://www.rustreplace.com/home/news They don't show a phone number anywhere, but I have it at home. When I get home from work tomorrow, I'll get it for you. Quote Link to comment Share on other sites More sharing options...
Rancid87 Posted December 8, 2020 Share Posted December 8, 2020 If you have a way to brake a strip of sheet metal at a crisp 90 degrees you can make those sections yourself. If you need to repair the channel that runs the length of the windshield a shrinker/stretcher will help provide the correct shape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.