MrDavie Posted February 16, 2022 Share Posted February 16, 2022 Looking to get a trunk bezel for my 72 Monte, went to OPGI, found it, but confused how it mounts?? There aren’t any holes buy my key lock?? Quote Link to comment Share on other sites More sharing options...
Dtret Posted February 16, 2022 Share Posted February 16, 2022 Looks like whom ever did your body work filled the holes. It’s possible that they are just painted closed. Blow the picture up and you will see the holes. If the bezel came with self cutting nuts your going to have a problem because if yours is like mine there are no holes on the inner trunk for the nuts. It requires push locks ( I don’t know exactly what they are called). But you’re going to need them. Quote Link to comment Share on other sites More sharing options...
1970mcss Posted February 16, 2022 Share Posted February 16, 2022 Barrel nuts I believe Quote Link to comment Share on other sites More sharing options...
Paul Bell Posted February 17, 2022 Share Posted February 17, 2022 You'll need to find a buddy with a 1971~1972 Monte so you can pull the emblem off and make a template for the holes. And yes, the lock cylinder is installed before the emblem goes on. Quote Link to comment Share on other sites More sharing options...
Dtret Posted February 17, 2022 Share Posted February 17, 2022 2 hours ago, 1970mcss said: Barrel nuts I believe I think you are correct. Quote Link to comment Share on other sites More sharing options...
71MonteCarloMD Posted February 22, 2022 Share Posted February 22, 2022 I believe It’s using fasteners for 1971, is it different for 1972? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.