Clever Idiot Posted February 24, 2022 Share Posted February 24, 2022 I have the steel Chevelle inner fenders mounted, and there's a bit of a gap on the back side near the firewall. Are there extensions that are supposed to go here that I'm forgetting? It's been probably 15 years since I took off the front stuff. Pics for reference. Passenger side Driver side 1 Quote Link to comment Share on other sites More sharing options...
1970mcss Posted February 24, 2022 Share Posted February 24, 2022 I bought these when i replaced the inner fenders 1970 Chevrolet Monte Carlo INNER FENDER SHIELDS WITH HARDWARE LEFT HAND & RIGHT HAND - PAIR | Chevrolet Monte Carlo Parts | BP1040M | DA10222 (thepartsplaceinc.com) 2 Quote Link to comment Share on other sites More sharing options...
Clever Idiot Posted February 24, 2022 Author Share Posted February 24, 2022 Ah! Beautiful. Thank you! They look metal - are they? I'm sure stock was plastic; I'm just curious. Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted February 24, 2022 Share Posted February 24, 2022 They are plastic like the originals and will complete the installation of the inner fender wells. They install from underneath. One bolt to the frame and 2 to the lower part of the fender well. 2 Quote Link to comment Share on other sites More sharing options...
Searsman Posted February 27, 2022 Share Posted February 27, 2022 Don’t remember seeing these on my 71. Guess I’d better take a peek 👀... I might have more work to do ... Quote Link to comment Share on other sites More sharing options...
stangeba Posted February 27, 2022 Share Posted February 27, 2022 My 71 (taken June 1983) 1 Quote Link to comment Share on other sites More sharing options...
1Bad454 Posted February 4 Share Posted February 4 Thank you for the info. I was wondering where they went. My car didn't have them or the fender support braces as shown in the pictures. Quote Link to comment Share on other sites More sharing options...
Grant MacPherson Posted February 5 Share Posted February 5 As someone posted awhile back, tighten carefully, they Crack easily unless the quality has improved. 1 Quote Link to comment Share on other sites More sharing options...
1Bad454 Posted February 5 Share Posted February 5 2 hours ago, Grant MacPherson said: As someone posted awhile back, tighten carefully, they Crack easily unless the quality has improved. Got it. Thank you for the heads up! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.