Dtret Posted November 6, 2022 Author Share Posted November 6, 2022 I got this from a member in Kansas. He also had an air cleaner but because of eBay I wasn’t going to pay the price. ( no Glen that isn’t your carb lol) Just for kicks I bolted it on the 55 to see if it was any good. It ran pretty good for sitting a buttload of years ( still better then the one I had rebuilt for my 71) 5 Quote Link to comment Share on other sites More sharing options...
Dtret Posted November 7, 2022 Author Share Posted November 7, 2022 Chris (member) sold me the rear bumper, 71 front bumper ( possibly better then the one on my 71, I haven’t looked yet) and some miscellaneous parts. I forgot to add this yesterday. 3 Quote Link to comment Share on other sites More sharing options...
Dtret Posted November 7, 2022 Author Share Posted November 7, 2022 Now I need to clean up this mess before I get into trouble. Lol. It’s getting out of hand. 8 Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted November 7, 2022 Share Posted November 7, 2022 Yea it don't talk long to make a mess eh. Bag them and tag them! Quote Link to comment Share on other sites More sharing options...
Michael Boyte Posted November 7, 2022 Share Posted November 7, 2022 That's going to take some rather large bags 😂 1 Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted November 8, 2022 Share Posted November 8, 2022 You are going to need to build an out-building for all of your parts, maybe Joe can give you the plans he used. rob 1 3 Quote Link to comment Share on other sites More sharing options...
jft69z Posted November 8, 2022 Share Posted November 8, 2022 What was that TV show....'Hoarders'? If you see people with tv cameras show up, it may be an intervention. 4 Quote Link to comment Share on other sites More sharing options...
Dtret Posted November 8, 2022 Author Share Posted November 8, 2022 20 hours ago, Rob Peters said: You are going to need to build an out-building for all of your parts, maybe Joe can give you the plans he used. rob I have two sheds with parts in them. But there can be a lot more stuff put in them. Quote Link to comment Share on other sites More sharing options...
Dtret Posted November 8, 2022 Author Share Posted November 8, 2022 16 hours ago, jft69z said: What was that TV show....'Hoarders'? If you see people with tv cameras show up, it may be an intervention. I may even pay for that. Lol. Someone needs to hit me upside the head with a 2x4. O wait that’s been done. Didn’t help. 4 Quote Link to comment Share on other sites More sharing options...
cny first gen 71 Posted November 8, 2022 Share Posted November 8, 2022 2 hours ago, Dtret said: I may even pay for that. Lol. Someone needs to hit me upside the head with a 2x4. O wait that’s been done. Didn’t help. That was the front of your head maybe a hit to the side may just do it 🤣🤣🤣 2 Quote Link to comment Share on other sites More sharing options...
DragCat Posted November 9, 2022 Share Posted November 9, 2022 For some reason I just had a flashback to the old was it super glue commercial, guy in a hard hat hanging from some beam? Dennis in a hard hat, you know stuffs about to get serious Quote Link to comment Share on other sites More sharing options...
Dtret Posted November 10, 2022 Author Share Posted November 10, 2022 1 hour ago, DragCat said: For some reason I just had a flashback to the old was it super glue commercial, guy in a hard hat hanging from some beam? Dennis in a hard hat, you know stuffs about to get serious I have one somewhere, no idea where. Someone once told me- safety first, above all else- I don’t think I grasped the concept. I am getting a little better with eye protection though. Lol. 3 Quote Link to comment Share on other sites More sharing options...
willie Posted November 10, 2022 Share Posted November 10, 2022 I have one somewhere, no idea where. Someone once told me- safety first, above all else- I don’t think I grasped the concept. I am getting a little better with eye protection though. Lo Dennis you should have seen that 2x4 then!!! It hit you square in the face. lol 1 Quote Link to comment Share on other sites More sharing options...
DragCat Posted November 10, 2022 Share Posted November 10, 2022 12 hours ago, Dtret said: I have one somewhere, no idea where. Someone once told me- safety first, above all else- I don’t think I grasped the concept. I am getting a little better with eye protection though. Lol. Hmmmmm, where's the dancing banana with a hardhat ? 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 2, 2022 Author Share Posted December 2, 2022 2 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 2, 2022 Author Share Posted December 2, 2022 Above pictures 1. Part of frame I cut off the wrecked car 2. Section I cut out 3. problem with existing frame 4. Where I cut it apart ( they didn’t load in order). The rest are not loading in orders either so you guys can look and laugh. You’ll figure it out. Sorry 2 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 2, 2022 Author Share Posted December 2, 2022 More. 2 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 2, 2022 Author Share Posted December 2, 2022 The last picture shows the original rusted holes sitting on top of the repair. It’s not perfect but it’s ok. 4 Quote Link to comment Share on other sites More sharing options...
MC1of80 Posted December 2, 2022 Share Posted December 2, 2022 Nice job Dennis! I have a few body mounts like that on the 71 402 4 speeds frame. I purchased the "washers" that are to be welded in. That's Kevin's job tho. Lolol l can cut the hole but my welding skills stink. Lol Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 3, 2022 Author Share Posted December 3, 2022 3 hours ago, MC1of80 said: Nice job Dennis! I have a few body mounts like that on the 71 402 4 speeds frame. I purchased the "washers" that are to be welded in. That's Kevin's job tho. Lolol l can cut the hole but my welding skills stink. Lol I bought the washers. But they were a lot thicker than the frame. I didn’t think they would weld correctly so I went this route. Let me know how the washers turn out because I’m curious if I possibly went the wrong direction. I still have two more to do. One I have another piece of frame for, the other may get a washer. 2 Quote Link to comment Share on other sites More sharing options...
willie Posted December 3, 2022 Share Posted December 3, 2022 Nice job Dennis!! Quote Link to comment Share on other sites More sharing options...
714024SPEED Posted December 3, 2022 Share Posted December 3, 2022 Looks great ,nice job 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 3, 2022 Author Share Posted December 3, 2022 Another one done. One to go. I think I might be pressing my luck on working in the basement on this. I just set off all the fire alarms in the house. Someone is NOT happy. 2 1 Quote Link to comment Share on other sites More sharing options...
Dtret Posted December 3, 2022 Author Share Posted December 3, 2022 So I finally finished all the frame holes I won’t bore you with them but I had a front shock hole that was egg shaped. I snapped the first picture after I started but you get the idea. An 11mm 1/4 drive socket fit perfectly in the other side so that was my goal. I did it. Ya. Something I have never done before. A good learning experience the last couple days. I’m now done with the frame work. It’s ready for sandblasting. 4 Quote Link to comment Share on other sites More sharing options...
willie Posted December 3, 2022 Share Posted December 3, 2022 Nice job Dennis!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.