1970mcss Posted March 7, 2023 Share Posted March 7, 2023 Does anyone have a source for the 3 mounts (60 on the diagram) for the air ride compressor?? I'm also looking for the gasket (57 on the diagram) between the rear cover and the rear housing. Let me know, thanks. G67 Compressor Diagram.PDF Quote Link to comment Share on other sites More sharing options...
Grant MacPherson Posted March 7, 2023 Share Posted March 7, 2023 I just use a good quality gasket material for 57 Quote Link to comment Share on other sites More sharing options...
1970mcss Posted March 7, 2023 Author Share Posted March 7, 2023 Thanks, that's what was thinking. The mounts are the parts I really need. I thought that I've seen them somewhere but can't remember, it's hell getting old. Quote Link to comment Share on other sites More sharing options...
Rob Peters Posted March 7, 2023 Share Posted March 7, 2023 For the rubber bushings I found the following two posts that may assist you: And this one: Good Luck rob Quote Link to comment Share on other sites More sharing options...
overdrive Posted March 7, 2023 Share Posted March 7, 2023 These are the closet match I've found. Just cut the heads off some 10-32 screws to add the second stud. Dan 1 Quote Link to comment Share on other sites More sharing options...
1970mcss Posted March 7, 2023 Author Share Posted March 7, 2023 Thanks Dan, I will get those ordered, and give them a shot Quote Link to comment Share on other sites More sharing options...
Dtret Posted March 8, 2023 Share Posted March 8, 2023 I found the bushings with the double studs on eBay. The rubberfeetwarehouse. 2 Quote Link to comment Share on other sites More sharing options...
1970mcss Posted March 8, 2023 Author Share Posted March 8, 2023 Thanks, Rob, Dan and Dennis, I going to try the mounts that Dan referenced. They measure almost the same as the original. Now I need to find the gasket material. I bought another compressor on ebay last week to try to rebuild. I took it apart last night and soaked it in evapo-rust and after 1 night the parts came out almost spot less. I thought I would pass the evapo-rust product along for the members that haven't heard of it. I'll post some pictures when I get it done 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.