Mike S Posted April 3 Posted April 3 For those who have made the change to the Tremec 5 speed what ratio (close or wide)did you select? Also what Overdrive? Quote
jft69z Posted April 3 Posted April 3 Depends what rear gears you have, and engine torque. I put the wide ratio, with .72 5th gear in my Camaro. I already had existing 3.08 gears in the back from the Doug Nash 5 speed that was in there. With the 454 in the car, first gear is kinda useless though. If I had to do it again, I'd maybe look into one of the other boxes. Tough call... 4 Quote
Mike S Posted April 3 Author Posted April 3 The car came with 2.73. Silversport quoted a close ratio. Initially I'm trying to decide to move to 3.73 with the close ratio or stick with the 2.73 and a wide ratio. Opinions welcome. Motor is a 402 with a bit of a cam. Quote
70white402 Posted April 4 Posted April 4 My monte has a 496 with a close ratio 5 speed tremec and 373 rear. Hold on tight. 4 Quote
420ponies Posted April 5 Posted April 5 3 hours ago, 70white402 said: My monte has a 496 with a close ratio 5 speed tremec and 373 rear. Hold on tight. I would most certainly like a ride in this Monte! Sounds like a good time!!🙂 1 Quote
Montemedic Posted April 9 Posted April 9 I would give the Tremec Technical Support a call and speak with the engineers regarding it. They can assist you in picking the proper transmission and gear ratio for your application. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.