70bowtie Posted December 4, 2012 Share Posted December 4, 2012 Replacing the ball joints and cleaning up the front suspension and chassis area. I took apart the front brakes and spindles well everything was really clean just grease on them. The original colour on the backing plates and the gold plating still on the caliper brackets. When I cleaned the spindles they appear to be a blue or green originaly one with a white stripe the other with a red one, anyone know if they where blue or green from the factory. But best of all no rust. Leo Link to comment Share on other sites More sharing options...
monte70car Posted December 5, 2012 Share Posted December 5, 2012 Paul here is a picture of the under of the hood on my the one that is currently been built is made the same way. Link to comment Share on other sites More sharing options...
Paul Bell Posted December 5, 2012 Author Share Posted December 5, 2012 Very nice sir! Thanks! Link to comment Share on other sites More sharing options...
72MC Posted January 22, 2013 Share Posted January 22, 2013 Started the Sweetheart up and ran her for about 30 minutes. What a sweet sound,... and smell I got 15 gallons of ethonal free 93 octane to put in her. She will be so happy . - Dave Link to comment Share on other sites More sharing options...
CKZ03 Posted January 22, 2013 Share Posted January 22, 2013 Not today, but over the weekend, I mounted my power brake booster, master cylinder and brake pedal/bracket & bled the system, no leaks, fully functional. Cleaned up my original A/C lines, installed new O-rings, installed lines & condenser Disassembled and cleand up blower motor/evaporator case & the under dash A/C & heater box before after Link to comment Share on other sites More sharing options...
LostnFound Posted January 22, 2013 Share Posted January 22, 2013 Very nice work Cory....great job! Link to comment Share on other sites More sharing options...
monte70car Posted January 22, 2013 Share Posted January 22, 2013 Ordered parts to finish a on going project in the interior. Link to comment Share on other sites More sharing options...
beater72 Posted January 22, 2013 Share Posted January 22, 2013 ...picked up my new big block power steering bracket set.One step closer! Link to comment Share on other sites More sharing options...
CKZ03 Posted January 22, 2013 Share Posted January 22, 2013 and got my power window kit today, still waiting for my new AAW wiring harness & power lock kit... Link to comment Share on other sites More sharing options...
Heff Posted January 22, 2013 Share Posted January 22, 2013 Did some port work on my exhaust manifolds "before" Link to comment Share on other sites More sharing options...
Heff Posted January 22, 2013 Share Posted January 22, 2013 "after" http://www.firstgenmc.com/photopost/data/601/photo_2_1_.JPG couldn't get the pic to show up? Link to comment Share on other sites More sharing options...
71MonteCarloMD Posted January 22, 2013 Share Posted January 22, 2013 Last Saturday, took my Monte out for a drive as it was sunny at mid 50's, can't wait til Spring to do body work Link to comment Share on other sites More sharing options...
71 MONTE 4 YA Posted January 23, 2013 Share Posted January 23, 2013 Thought about how it's going to look whem I'm done with it Link to comment Share on other sites More sharing options...
Sam (Bones) Posted January 23, 2013 Share Posted January 23, 2013 sandblasted and painted a few parts for the engine Link to comment Share on other sites More sharing options...
footballubet Posted January 23, 2013 Share Posted January 23, 2013 Walked past it on my way to the fridge for a It is all covered up on this frigid cold evening. Link to comment Share on other sites More sharing options...
502ci Posted January 23, 2013 Share Posted January 23, 2013 I turned the heat up 5 degrees in the garage...the Monte looked a bit chilled... Link to comment Share on other sites More sharing options...
LS5 Posted January 23, 2013 Share Posted January 23, 2013 Tried to sort out a wiring harness for Rear Courtesy lights for the convertible today while grimacing.....grrrrrrrr. Managed to get the wires sorted out but now have to get them in the Monte somehow but it will have to wait a while..... Darren Link to comment Share on other sites More sharing options...
amsterdam84 Posted January 23, 2013 Share Posted January 23, 2013 I looked at a picture of it. Link to comment Share on other sites More sharing options...
jays55 Posted January 23, 2013 Share Posted January 23, 2013 Got the classics out for their monthly drive (weather permitting) today. After a mid January snow, most roads were cindered. Now we've had sunshine and high temps in the 50s for six days and the county got out and swept up the "gravel". All smiles! Link to comment Share on other sites More sharing options...
bigscaht Posted January 23, 2013 Share Posted January 23, 2013 removed all body bolts except the one stubborn one who wants to fight with me!! Link to comment Share on other sites More sharing options...
cbolt Posted January 23, 2013 Share Posted January 23, 2013 Ordered the new stereo and rear control arm package... arms, braces, sway bar, and the rest of the LED's to complete the dash. WOOT!!! Link to comment Share on other sites More sharing options...
bigtankjones Posted January 23, 2013 Share Posted January 23, 2013 Sunday I stripped the front part of the Monte frame, and some of the firewall of paint. I will attack it again this weekend. Link to comment Share on other sites More sharing options...
zmanabba Posted January 23, 2013 Share Posted January 23, 2013 Used it to drive over to Idaho to buy a truck (1977 chevy 4x4 short bed) to use as my winter ride. Then used it to tow home the truck when it died ( charging system ) lol. David Link to comment Share on other sites More sharing options...
Sam (Bones) Posted January 25, 2013 Share Posted January 25, 2013 picked up my bumper brackets from the sand blaster and gave them a coat of etch primer mocking up the engine too Link to comment Share on other sites More sharing options...
AL M Posted January 25, 2013 Share Posted January 25, 2013 Grinning devilishly....I ordered a fabbed 9 in rear from Crazy Davey a few days ago. Cant wait to get it in. Come on Spring!! Link to comment Share on other sites More sharing options...
Recommended Posts