Need fuel pump #

[70 Iron]

I need the part number for a BB fuel pump for my 70 Monte. It has the return port.I ordered a AC Delco but its the long type like for a chevelle.I'll need the short one that won't hit the crossmember.It does'nt have to be a AC Delco # but would like a oem style

Any help would be appreciated.

 

Terry

[Sam (Bones)]

the long one should work with a big block

[70 Iron]

Thanks Sam,that will be great,I like the looks of the long one .I was about to send it back.

Terry

[iceman]

The long one is correct. That is the one I'm running on my SS car.

[70 Iron]

Thanks Stan,I wanted to know because I'm sending some other parts back and was planning on sending the fuel pump,so I'm good to go.My 427 crate engine will be here tomorrow and I'll start putting on all the parts thats needed.

Terry

[70 Iron]

Is there a difference in a BB and a SB fuel pump ?

The arm is the same and the bolt holes look the same.

I have the BB long pump as stated above,and I want to use the 4pc steel lines ,the one runs to the pump is around 2 inches short and looks like if I had the short pump it would work,It doesn't look like it could be bent to fit the long pump with out a lot of twisting ect.and I think it would still be short.

My friend at the garage got me a short pump with the 3 outlets like I need but I believe its for a small block.

If I can't find a short BB pump with 3 outlets then I may cut the steel one and add a piece of hose hidden behind the WP.

Terry

[Andreas]

From what I can find the fuel pump arms are actually different between SBC and BBC pumps

[Mike 57]

different pump. stroke is not the same

[70 Iron]

OK thanks,I'll just make the steel line work and keep the BB tall pump on.It looks better anyways

Terry