AL M Posted March 22, 2015 Posted March 22, 2015 I recently bought a new Delco Moraine booster, master, proportioning valve and stainless lines from Right Stuff Detailing. Great stuff by the way. I noticed on the back of the prop valve that hangs off the master there is what seems to be a rubber boot or grommet almost like a button. Does this need to be bleed? Or can I just throw it on there?
Rob Peters Posted March 22, 2015 Posted March 22, 2015 Al, it has been awhile but to bleed the rear brakes, I think you will need to press and hold that P-valve Button in during bleeding. It doesnt depress very far, onlu about 1/8th to 1/4 inch depression. Rob
John S Posted March 24, 2015 Posted March 24, 2015 I used a small piece of wood and used it as a wedge to depress button. John S
AL M Posted March 24, 2015 Author Posted March 24, 2015 John did you posts pics of that at one time??
John S Posted March 27, 2015 Posted March 27, 2015 No I did not but I think someone else might have. John S
Recommended Posts