bigtankjones Posted December 1, 2015 Author Posted December 1, 2015 Is that a white vinyl top? That will set that blue off! Fantastic! Nope Glen. Dave just did a make shift top I think to know where the edge was to cut and buff. It does look cool though. I can't copy Sam. 1 Quote
Rock Posted December 2, 2015 Posted December 2, 2015 Nope Glen. Dave just did a make shift top I think to know where the edge was to cut and buff. It does look cool though. I can't copy Sam. so what color top are you looking at? I think white would really set it off but not my car so my opinion doesn't matter. Quote
72MC Posted December 2, 2015 Posted December 2, 2015 Tony, that is looking Super Purdy!!! I'm sure spring wont come soon enough to go cruising. You'll be like a kid at Christmas but instead of presents, you'll be pining for good weather. - Dave 1 Quote
bigtankjones Posted December 2, 2015 Author Posted December 2, 2015 I got some more pictures from Dave this morning. Buffed the right quarter Tuesday night. Next onto the doors and trunk lid. Quote
bigtankjones Posted December 2, 2015 Author Posted December 2, 2015 so what color top are you looking at? I think white would really set it off but not my car so my opinion doesn't matter. Black vinyl. That had always been my dream is a Dark Blue with Black vinyl top Monte. Quote
bigtankjones Posted December 6, 2015 Author Posted December 6, 2015 Went out today to help prep the back side of the trunk lid and doors. For a better look at the paint job on the body since it was outside. Looks great. Dave sprayed and cleared the backsides of the doors and trunk lid. Tomorrow night we block the outsides of the doors and trunk lid and spray color. Pictures to follow on that process. Here are photos of today's work. Quote
Boots Posted December 6, 2015 Posted December 6, 2015 Spring can't come too fast for you my friend.!!!! Quote
Leghome Posted December 7, 2015 Posted December 7, 2015 Tony don't let it touch that FURD behind it or bad things might happen. I parked next to an old rusty furd pickemup last summer an I seen some of the rust try to jump over to the Monte :yay: 2 Quote
Rob Peters Posted December 7, 2015 Posted December 7, 2015 Very, Very Nice. it is great you are able to help out in the prep/paint/finish work. Not everyone is that lucky and it is something you can really take pride and brag about while bench racing at meets and car cruises. rob 2 Quote
bigtankjones Posted December 12, 2015 Author Posted December 12, 2015 Update on my Monte. Doors and Trunk lid where painted Thursday night. Then Dave Cut and Buffed them Friday and Saturday. Here are some pictures. I'm going out to his shop Tomorrow, we Are putting it on the trailer and hauling it over to Unionville for a few days cause he has an insurance job that he needs to get in and paint. Quote
Michael Boyte Posted December 12, 2015 Posted December 12, 2015 That's going to be a very nice ride 1 Quote
Rob Peters Posted December 13, 2015 Posted December 13, 2015 I think the term "SWEET" pretty much sums it up. Keep the pictures coming!! rob 1 Quote
bigtankjones Posted January 3, 2016 Author Posted January 3, 2016 It's been a while since I had any updates on my Monte. I went out to Dave's shop last Sunday and we started working on the front pieces again. Dave sprayed epoxy primer on the right front fender today and I see from the photo he has reprimed the left front fender and sprayed guide coat on it. I'm heading out to the Shop in the morning to flip over the hood and prep the underside for Black epoxy primer. From the picture of the fender. It looks like I did a pretty good job on the lower patch work. 1 Quote
Mo's70MCs Posted January 3, 2016 Posted January 3, 2016 Nice! That baby is gleaming. Love the color choice. 1 Quote
Rob Peters Posted January 3, 2016 Posted January 3, 2016 Very nice Tony..... the excitement of assembly is building. rob 1 Quote
bigtankjones Posted January 3, 2016 Author Posted January 3, 2016 Went out today after 10am and sanded and scotch brighted the under side of the hood. Dave sealed the underside then mixed up some base coat black. Wanted to block the right front fender, but he said he used a House Of Kolor primer and it still wasn't dry enough yet to block. I will go back out Tuesday evening and flip the hood over so we can block it. Talking color next Saturday. Quote
Mo's70MCs Posted January 5, 2016 Posted January 5, 2016 Great pictures.. Tony. Now the hood has to be near perfect, cause you'll be looking down it all the time, any lil flaw and you'll be kicking yourself in the behind for not paying more attention on it. Quote
Leghome Posted January 5, 2016 Posted January 5, 2016 "any lil flaw and you'll be kicking yourself in the behind" I know that form personal experience on my hood. Quote
bigtankjones Posted January 17, 2016 Author Posted January 17, 2016 Update on the 70 Monte. I went out to Dave's this morning to help hang the fenders and hood on the car. Got to go back out tomorrow and loosen up the core support to open up the gap I the left front fender. Dave has to finish the fender extension front and rear yet. Almost done. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.