Color change on dash

[Donny vestal]

My dash is green is green how's the best way to go black

[cny first gen 71]

First clean it real good, then clean it again, rinse all the cleaner off real good. Then use the SEM stuff. Go to local body shop supply place they will have it. Spray it on nice and even and it will look like new for years.

[Leghome]

You might also ask the paint store if a adhesion promoter should be used. This will make sure the paint adheres.  Like Steve said clean it and then clean it again you do not want any contaminants on the surface because they will cause all sorts of bad things to happen. That is one reason I swill never use Armor All on any of my cars inside or out. After working a in a body shop part for 25 years you remember some things vividly. 

[Donny vestal]

Thanks guys for the help I'll take you're advice

[70bowtie]

As mentioned above get it clean I used Dawn dish liquid soap and I use Transtar adhesion promoter on the hard surfaces and then wipe it down with lacquer thinner. Had good success with SEM.

 

Leo

[cny first gen 71]

I didn't use any adhesion promoter on my dash pad and no problems several years later but on hard plastic (kick panels) I did, it worked great so I guess you could go eather way.

[70bowtie]

Oh on my post above want to clear something up I wipe it down with lacquer thinner before I spray the adhesion promoter not after don't want to confuse anyone. I also did a dash and didn't use it and worked out good.

 

Leo

[Jared Richey]

Yep clean it, then dye

[Donny vestal]

I don't want it to peal back off(JARED)lol

[Jared Richey]

It ain't

[Jared Richey]

Prep is key