72_Monte Posted May 27, 2017 Posted May 27, 2017 Is there a car I can take the rear disk brakes from to put on the rear of the Monte ? Quote
NC72MC Posted May 27, 2017 Posted May 27, 2017 Your best bet is to go with a kit from wilwood, great quality and bolt up. By the time you pull something off a donor and rebuild it to make sure it holds up or works correctly you are better off. Quote
420ponies Posted May 28, 2017 Posted May 28, 2017 I have a set off a 1998 camaro. it fits a 10 bolt rear axle. just have to make the custom ends for the E-brake cables.Have too also change out the proportioning valve. CPP products has the answers for the swap. They also just had a write-up on Hot Rod Magazine on it too. Quote
Blackhawk Posted May 30, 2017 Posted May 30, 2017 You can also use a set from a S10/Blazer, around the 1998+ models. Here's some information from the Chevelle forum: http://www.chevelles.com/forums/16-brakes-suspension-steering/30724-using-s-10-blazer-rear-disk-brakes.html Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.