Help Please - Console Jumper Harness?

[MikeParker]

Need some help -  doing bench to buckets conversion on my 70...  steering column shifter to console.  New shifter is in place.  For the console, I need a jumper harness, and I searched Luttys - found this part number:  CH85108 --  here's the link:   https://www.luttyschevy.com/i-20838111-console-harness-ch85108.html#!year%3D1970%7C%7Cmake%3DCHEVROLET%7C%7Cmodel%3DMONTE%20CARLO 

 

Is this what I need to go between the column and the console??

[RealRed70]

No, that is the console harness. You need the extension harness that goes from the dash harness to the console harness.

[RealRed70]

Your dash harness will not have the plug to connect the extension harness to it. You will have to tap into a White wire, an Orange wire and a Gray wire in your dash harness. The White ties into the door jamb switch for your console courtesy light at the rear of the console. The Orange ties into a constant hot for constant power for the courtesy light. The Gray ties into the dash lights for your shift indicator lights on your console top plate.

[RealRed70]

Does your console have a harness in it?

[RealRed70]

I can not seem to find what you need on that site. It should cost about $45.00 for the extension harness. NPD Chevelle has what you need. They should have it in stock. 

[John S]

Try this website  http://www.wiringharness.com/

John S

[MikeParker]

Thanks for your help!  I searched NPD and found the following ( IN STOCK TOO!! )

 

https://www.npdlink.com/product/harness-console-extension-oe-style-repro/113278/7304?year=1970

 

is the what I need to get?

[RealRed70]

Yes, it is.

[MikeParker]

Thanks Dan -  I ordered it yesterday -- much appreciated,

[RealRed70]

Your welcome.