LSX Innovations swap adapter plates

[P.O.S.racer]

Has anybody used the LSX Innovations LS adapter plates?   i have them, the only way they would bolt up (without modifying/cutting the motor mounts )  is all the way back (i figured further back the better)   but is it gonna be too far back?  it seemed kinda close but than i removed the body (because during the swap I noticed the body mounts were rusted out)      do i need to move the engine forward alittle.  

[Blackhawk]

Having the engine all the way back is going to cause issues with the firewall and transmission.  The mounts that you used should really have a fifth position 1-1.25" forward of stock, like their non-adjustable mounts:

https://www.lsxinnovations.com/product/ls-swap-plates-adapter-plates-billet-aluminum/

 

What issues were you having with the motor mounts in the other positions?

[P.O.S.racer]

the stock motor mounts have tabs or something that was in the way,  i can cut them off easily enough ,         my simple motor swap turned in to taking the body off .