Jump to content

Recommended Posts

Posted

I bought my car in 73 [it's a 72].........I washed the engine bay down over the years and it's not too bad, but I want to try to get it looking new again....it has given me 165 k miles and still running like new.......so it deserves to look like new🤗 .........

I would like to know if there are any new products on the market that I can try??.... I would think that a good power washer and some elbow grease would work the best, but I'm an old timer now and the elbows aren't greased the way they used to be 😉  ...... Thanks for any suggestions...

Posted

I use a hose and Simple Green with a combination of brushes. I have some metal brushes as well as plastic brushes. I always keep old tooth brushes too to access those hard to reach areas. I just cleaned and painted my 70 engine in the car. The engine has never been out of the car. 1/2 day of disassembly, a couple days of cleaning, a few hours of masking and about 20 minutes of painting... and a very sore back!

89F0E12A-C3EA-48EF-85B8-5146F6AFE535.jpeg
 

Here’s a photo during cleaning. I have an old set of valve covers I use during cleaning and painting. I paint the valve covers separately.

27FA594A-121F-42E5-B686-72B87EF1A1FD.jpeg

  • Like 4
Posted

We use the same method as Canuck. Always worked for us also. 

Posted

Thanks a lot.... good old gunk,  I'll give it a try..........my back won't take the toothbrush treatment...but will probably take the valve covers off......they have only bin off once in 160 k......I snapped a push rod guide ear .......replace guide and push rod and lifter..... I enjoy working on it again.....it sat for 20 years......

  • Like 1
Posted

I used spray 9 and some different brushes on my 63 Pontiac and it worked great just rough on the back lol.

KIMG1587.JPG

KIMG1441.JPG

  • Like 3
Posted

Both of your cars look amazing!!!

I never used simple green but i have used spray nine. The spray nine is very strong and you have to water it down alot. However i do use it, its cleans really good, but make sure you rinse well. It took the finish off my gutters (my fault) did not rinse enough.

  • Like 1
Posted

Look on YouTube. There's a kid doing engine cleaning. Learning alot about how to clean/ dress up the engine bay. They are like20 minutes long. He uses lots of different brushes. Engine and compartment looks like New!!post-259-0-61935100-1474727657_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...