Introduction

[Mike welch]

Hi first gen mc club. I’m back after a few years off of hot rodding . Good to be back. I got my Monte Carlo back on the road and now I have smashed it up a little bit. Looking for some parts. I have 71 Monte Carlo that I need a left front fender four and a surround bucket for the headlight. I have numerous monte Carlo parts. 

[Mike welch]

Last time I joined the club I got a keychain.

[cny first gen 71]

Welcome Mike, looks like a pretty nice car except the ouch in the front.

[Rob Peters]

Mike we have Leo in Michigan, Jared who lives in South Carolina who sell parts.  Closer to you is Joe Vegain Serria Vista AZ.  Both Leo and Jared are dues paying FGMCC Members

rob

[Canuck]

Welcome back Mike!

I remember that car. Sorry to see the damage to it.

If you’re on Facebook, look up Hector Carrillo. He has a lot of Monte parts and is in Baldwin Park, Ca. His number is 626-488-5472.

[MC1of80]

Welcome Mike! Sorry to see the damage. How is the frame horn? I hope it's not bent. Good luck! 

[1970mcss]

5 hours ago, Mike welch said:

Last time I joined the club I got a keychain.

Welcome back, Bummer about the damage. I wonder if anyone still has any extra keychains?? Good luck with the repairs

[Glen]

Welcome back.

Glad to see that your coffee wasn’t spilled in the wreck. I don’t know about you, but I can be an angry [censored] without my Java. 
 

 

[Dtret]

Welcome back. I hope you find the parts you need.it’s still a nice looking car though. I hope you get it fixed. 

[willie]

Welcome back Mike!!! OOOOOCCCCHHHH!!! Hope you fix her.

[Mike welch]

23 hours ago, MC1of80 said:

Welcome Mike! Sorry to see the damage. How is the frame horn? I hope it's not bent. Good luck! 

Hello, I bent the front of the frame where the radiator sets a little bit. My steering box has got my center link closer to the crossmember. No matter what I’ll get the frame straightened back or I’ll find another roller. The cab of my car is in good shape. It’s never been smashed, it’s a California car it doesn’t have hardly any rust I pretty much got all that done in 06 through 09. I am Monte Carlo through and through. I’ll take a Chevelle off the road to keep my Monte on the road.

[MC-71]

Sorry for your problem. You should be able to find all the parts you need.

Where did you get your glass hood? Looks like a real nice fit.

[Mike welch]

20 hours ago, MC-71 said:

Sorry for your problem. You should be able to find all the parts you need.

Where did you get your glass hood? Looks like a real nice fit.

I got that hood in 07 from a guy in Long Beach. I’ve never seen the guy making the hood sense. that hood was his first one a prototype. It fits amazing. And I got really lucky that I didn’t blow it apart. It’s got a couple little scratches and a place where the paint popped away from the fiberglass. I will do some minimal prep work repaint it and get it back on the car.

[MC-71]

Thanks for the reply Mike. I wished the new steel one would have the scoop sized appropriate to the hood length. It doesn’t. I might buy the glass scoop and put it on a spare hood that I have.

[Jared Richey]

Were you the same one that was here years ago. Mike and Jaylene Welch?

Look up Hector he is very close to you for the large parts. 6264885472

I have a grill and headlight extension. BTW what happened?? 

 

[Mike welch]

Yes I am. Jaylene and I are divorced. Have been divorced since 2013. Obviously I got the Monte Carlo. That car kept me sane through the insanity. I beat that car like a red headed step child. Now I owe it to the vehicle to get it back on the road and smash that throttle once again. Lmao.