Grant MacPherson Posted March 30, 2022 Posted March 30, 2022 I will start with the mirror, How do you tighten the rear nut on the mirror without cutting out the inner sructure? I spent quite awhile and a few choice words getting flat washer, lock washer and nut on it but can't get a wrench on it to tighten. Was thinking of picking up a 7/16 crow foot and try that? The other problem today was went to install the lower fender shields from the parts place and they do not fit very well, afraid they will break if I bolt them in as they are. Do you heat them to reshape or slot the holes? any help would be great thanks Grant Quote
Scott S. Posted March 31, 2022 Posted March 31, 2022 Grant, I went with a 1/4" drive socket set with a few extensions and a swivel joint. It's tricky, and you may have to use a "shepard's hook" to align the top end onto the nut while holding the driver at the bottom.... Like I said, it's tricky. As for the lower fender shields, do you have any photos ? Not sure what you're trying to fit together... Scott. Quote
Canuck Posted March 31, 2022 Posted March 31, 2022 My inner fender shields bolted in without any hassle. Quote
Grant MacPherson Posted March 31, 2022 Author Posted March 31, 2022 Hi Aaron Couldn't get a socket on the mirror, ended up with a custom bent wrench. am I being too picky on the fender fillers? it fits nice on the inner frame buts drops off as it goes outward. were yours the same? thanks Grant Quote
Scott S. Posted April 1, 2022 Posted April 1, 2022 That works !!! LOL I've got meat hooks for hands, (and sausages for fingers) so the bent wrench wasn't as easy an option. Quote
Grant MacPherson Posted April 1, 2022 Author Posted April 1, 2022 should have had someone taking pictures of my expressions as I was twisted up eyes squinted and probably touge hanging out. What we do for fun! 1 Quote
Scott S. Posted April 1, 2022 Posted April 1, 2022 Like pulling the driver's seat so one can get a good angle at dash wiring ??? Feet up on the back seat, all the tools under one's head....... lol Quote
Scott S. Posted April 1, 2022 Posted April 1, 2022 Did you ever find that hood spear for a '70 ?? Quote
Grant MacPherson Posted April 2, 2022 Author Posted April 2, 2022 I wasn't looking for a spear? Quote
Scott S. Posted April 2, 2022 Posted April 2, 2022 No, but a couple months ago I was...... you said you might have a spare kicking around. Quote
Grant MacPherson Posted April 4, 2022 Author Posted April 4, 2022 that seems to fit a lot tigher to the bottom of the frame than mine does? thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.