Lou Posted April 27, 2022 Posted April 27, 2022 Senior moment. Do you pull or push the adjustment rod to adjust the clock on a 70? I have the clock apart for cleaning and attempted repair of contact point and adjustment rod. I have a spring, gear, rod, and a pocket where I think the spring should go which would necessitate pulling the rod to adjust clock. Just want to be sure before I press gear on the rod. Quote
Lou Posted April 28, 2022 Author Posted April 28, 2022 53 minutes ago, MC1of80 said: Pull Makes sense. Thanks! 1 Quote
Lou Posted April 28, 2022 Author Posted April 28, 2022 It's kinda' cool just watching that clock work...... Quote
Glen Posted April 28, 2022 Posted April 28, 2022 I set the clock in the ‘71 when I took the first drive last week. Was nervous as all hell pulling that pin… was waiting for it to separate from the clock with how it felt, but all is well. 2 Quote
sbarnette Posted April 28, 2022 Posted April 28, 2022 My 71 had been sitting in storage for about 5 years until I pulled it out recently. Once I put a battery in it and got it running, I was surprised to see the clock was working. Went to set it and the pin came right out in my hand! Oh well! 1 Quote
DragCat Posted April 28, 2022 Posted April 28, 2022 Yea mines real finicky, sometime I pull, spin, and nothing happens. I'm just waiting for one day it to just pull all the way out like Sammy's Quote
Lou Posted April 28, 2022 Author Posted April 28, 2022 I used Gorilla Epoxy to set the gear on the rod. Fingers crossed. Tried to polish the lens, cleaned it up (glossy) but still has a fog to it. Quote
Lou Posted April 28, 2022 Author Posted April 28, 2022 Done! If you listen close you might be able to hear that vintage 'click'. VID_20220428_182950724.mp4 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.