Fusible link

[dan402]

Good evening all. I would like to know what the amperage rating for the fusible link 6 inches above the starter positive lead on the wire that goes to the alternator according to the schematic. Thanks. 

[John S]

I don’t know for sure the amperage rating but I believe it is a 10 AWG wire which I believe is 30 Amp. A fusible link should be two sizes smaller than the wire it protects. For example if you are protecting a 10 AWG wire you should get a 14 AWG fusible link. I think I’m correct on this if not somebody can correct me. 
John S