a/c issues

[tire size]

i have a 1972 monte carlo have replaced almost all the ac components not very cold and does not blow very strong on max ac any hints would be helpful

[1970mcss]

Did you change the poa valve??

[Steve G]

Are you having a proper charge done?? If you are just pumping those autozone cans into your system it will never work right..

[Rob Peters]

Tell us what all was replaced in the system.

rob

[1970mcss]

That's why I mentioned the poa valve. When I got my car the previous owner mentioned the car was converted to r134 but he just pumped freon in and didn't work with the old valve

[tire size]

16 hours ago, 1970mcss said:

Did you change the poa valve??

yes

[tire size]

On 10/31/2022 at 3:22 PM, 1970mcss said:

Did you change the poa valve??

that should be a no my brain is faster then my fingers!!

[tire size]

On 10/31/2022 at 6:56 PM, Steve G said:

Are you having a proper charge done?? If you are just pumping those autozone cans into your system it will never work right..

yes, never use the store cans

[tire size]

On 10/31/2022 at 9:53 PM, Rob Peters said:

Tell us what all was replaced in the system.

rob

after market compresser, all relays, box looks good, blower fan, shop guy says dir valve may help i dont want to put in a vintage air system just want ac to work

[willie]

Hey Bruce, i am not sure where Robs guy was but i think somewhere in FL. I know when Rob did his system he said they were great people to work with.  Maybe Rob can throw there phone and address and you can take a run there. Just my .02

[Rob Peters]

6 hours ago, willie said:

Hey Bruce, i am not sure where Robs guy was but i think somewhere in FL. I know when Rob did his system he said they were great people to work with.  Maybe Rob can throw there phone and address and you can take a run there. Just my .02

Not the company in Florida Willie.  I used Old Air Products in Ft. Worth Texas.  https://www.oldairproducts.com/   I had my compressor rebuild through them and ordered new lines, drier, expansion and POA Valve from them.  They were very good to work with in helping me decide what I wanted to order and answering any questions as I was installing everything.  I am not sure where Bruce ordered everything from but if I were him they would be the very first phone call for assistance.  In reality, I would think if he is also working with a company local to him on a fix they should be able to troubleshoot his issues. 

rob 

[willie]

Sorry Bruce wrong info, i thought they were located in Fla!

Thanks for straightening that out Rob and chiming in.

[cbolt]

Old Air Products is a great company and will work with you to get you what you need. On top of that they stand by their products. Highly recommended. 

[tire size]

On 10/31/2022 at 3:22 PM, 1970mcss said:

Did you change the poa valve??

is the poa the same as the dir valve? and what will that do? rookie here

[1970mcss]

I'm not sure what the dir valve is. I found this link for poa valves

 

About POA valves | Original Air Group

[tire size]

7 hours ago, 1970mcss said:

I'm not sure what the dir valve is. I found this link for poa valves

 

About POA valves | Original Air Group

thank you

[Michael Boyte]

I agree, old air products is a really good company to work with. They will stand behind everything they sell !!

[Andy's Auto]

These are what makes 134a work really well. My 71 will freeze me out in South Florida with all stock components. It converts the old POA system to a cycling clutch system. Easy to install. Old Air sells them.