monte70car Posted October 22, 2008 Posted October 22, 2008 jake why the shortie headers for? i would pull the water pump off so you can get the bypass hose easier. so far it looks like its coming along nicely Quote
Shadow Gray SS Posted October 22, 2008 Author Posted October 22, 2008 That is what the builder of the engine recommended. I told him what was said on here about them, but he wants to try them anyway. We'll see... Both he and the installer prefer these. Quote
FerrariTruck Posted October 22, 2008 Posted October 22, 2008 Looks good...But I would advise to ditch the chrome t-stat...The hose wont fit right on it and they are prone to rust and leak...Get oem GM or similar, trust me..I think alot of the guys here have learned the same thing... By the way, what cam are you running? I think the 770 might be overkill If you dont have a cam that requires that size.. Quote
7tonemonte Posted October 22, 2008 Posted October 22, 2008 Jake, I had a post up about 2 months ago with the chrome t-stat! Mine rusted out, and always leaked. I could never get it to stop. Go back to the stock one!! Everyone that replied to my post had the same experience. Everything else looks awesome.....cant wait to see more pics Quote
502ci Posted October 22, 2008 Posted October 22, 2008 That was a fun stage you are at...getting it ready to drop it in... Are those old motor mounts? If so you might want to think about some new ones. Wow, you post some pictures and get a bunch of "do this and do that" comments (me included)... Bill Quote
savvarock Posted October 22, 2008 Posted October 22, 2008 That thing looks sweet. It'll look nice when you put the headers on. Quote
Ian Posted October 22, 2008 Posted October 22, 2008 Looking good! Any details on the build? Ian Quote
Shadow Gray SS Posted October 22, 2008 Author Posted October 22, 2008 The T-stat & valve covers are polished billet aluminum. I don't remember the specs, but I will post them when I get home. I know the build is aimed at 425-450 hp & 500+ TQ. Quote
Shadow Gray SS Posted October 22, 2008 Author Posted October 22, 2008 Comp Cam --280/280--230/230@.050--520/520--110 lobe separation Mark V heads ported & polished Mark V Block .030 over CSI performance HEI & accell plug wires Sound like a good combo? Quote
FerrariTruck Posted October 23, 2008 Posted October 23, 2008 Comp Cam --280/280--230/230@.050--520/520--110 lobe separation Mark V heads ported & polished Mark V Block .030 over CSI performance HEI & accell plug wires Sounds like it will be healty, However I so so on the comp cam, Personally I would have gone with the Lunati Voodoo series..Tons of good info on those cams over on chevelle site Sound like a good combo? Quote
Sam (Bones) Posted October 23, 2008 Posted October 23, 2008 I like Taylor wires, won't ever use the MSD again, hated them Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 We may fire it tonight and break it in. Then I can get the headers on and get her to the exhaust guy. Quote
MADMAC Posted October 23, 2008 Posted October 23, 2008 Looks great Jake. Can't wait to hear it! Quote
FerrariTruck Posted October 23, 2008 Posted October 23, 2008 remember the oil additive (zinc) especially with COMP CAMS Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 We are using Gibbs break-in oil. I also bought some of the additive that I posted about, Motorhead Classic, for the change after. Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 It won't fire until Saturday. They sent the wrong pulleys... Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 Looks good...But I would advise to ditch the chrome t-stat...The hose wont fit right on it and they are prone to rust and leak...Get oem GM or similar, trust me..I think alot of the guys here have learned the same thing... By the way, what cam are you running? I think the 770 might be overkill If you dont have a cam that requires that size.. I brought this up last night and Kevin asked if you guys ever tried cleaning the inside of your radiator hose with some brake cleaner right before installing it. He says he does this all of the time and it seals everytime. Mine is aluminum, don't have to worry about rust thank goodness. The cam is Comp Cams 280/280--230/230@050--520/520--110 Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 I like Taylor wires, won't ever use the MSD again, hated them What about Accel 8.8 spiral? Quote
monte70car Posted October 23, 2008 Posted October 23, 2008 i run the accel race wires on my. as for the chrome water neck i have no problem keeping the hose on and it don't leak. Quote
Shadow Gray SS Posted October 23, 2008 Author Posted October 23, 2008 I also asked about the headers and these are considered 3/4's. They stay tucked in and don't have to worry about dragging them, and the power gain would not be that significant for my use. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.