72 Monte carlo fender extension bezel to front bumper grille filler panel?

[PHIL CUZ 72 402]

Quick question or maybe you can guide me in the correct direction.

72 monte front fender headlight extension bezel,how does it attatch to front bumper filler panel closest to the grill with screw it seems like i am missing a L bracket or some type.This would be close to outer edges to grill on both sides lower part of headlight extension bezel has a small hole for philips sheet metal screw would go into & some kind of bracket behind it.Or maybe a part# or picture of bracket would be great. its been 12 long years on this frame off resto & i do not remember. For both sides,any help would be great,.Thanks Phil Schiavarelli 239-691-5509

[Dtret]

I will look at the 72 tomorrow but I don’t think it attaches to the filler at all. I say that because I recently changed the bumper filler on my 72 and I don’t remember messing with the extension screw. But I could be mistaken. 

[PHIL CUZ 72 402]

Thanks Dennis

[Dtret]

They screw to the front of the fender with a slide on “ nut”. 

[MC1of80]

1 minute ago, Dtret said:

They screw to the front of the fender with a slide on “ nut”. 

I believe he is asking about the other side, by the grille Dennis. 

[Dtret]

Just now, MC1of80 said:

I believe he is asking about the other side, by the grille Dennis. 

O come on. That was enough work digging that out. You expect me to read correctly too ?  lol. 

[Dtret]

Ok. My 72. Assembled picture didn’t turn out so I went to the pos70. 8 inch bracket goes from the middle of the core support to the top. Bolts on with two bolts. The fender tie bar bolts to the top of it and the bumper filler bolts to the bottom. There’s a speed nut attached to the bottom of the bracket for the extension. And I just realized I have no idea how to put this car back together. lol. 

[MC1of80]

1 hour ago, Dtret said:

Ok. My 72. Assembled picture didn’t turn out so I went to the pos70. 8 inch bracket goes from the middle of the core support to the top. Bolts on with two bolts. The fender tie bar bolts to the top of it and the bumper filler bolts to the bottom. There’s a speed nut attached to the bottom of the bracket for the extension. And I just realized I have no idea how to put this car back together. lol. 

Ok, so now does the 72 have that bracket? 99% of our Montes are 70-71s so I can't say for sure. 70 -71 yes, have the brackets. Lol

[PHIL CUZ 72 402]

O.k. guys found them i appreciate all you guys help.

its been 12 years on frame off resto & knew i was missing something.I sand blasted them & p.o.r. 15 them about 10 years ago & had them packed away.

You guys are awesome thanks again Phil Schiavarelli

[MC1of80]

And now I know definitely that 72 has them also. Cool! Thank you.