Sorted my parts.

[Denny]

sorry , need a 70 front fender ext.

[Dtret]

16 hours ago, Denny said:

sorry , need a 70 front fender ext.

Ok. Let me get some pics. Drivers side correct. I also need a know if you have ( or are going to install) the chrome piece under the headlight. That requires different size holes   

[Denny]

no chrome,drivers side,I have one but having trouble lignin it up to the fender and hood ,hoping my fender ext. is tweaked

[Rob Peters]

Maybe a 71 fender?

rob

[Denny]

I wont be needing another fender ext. after all. found my orig. beatup 70 fender ext. fits the same way as the better one I was using.Also installed the bumper valance ,the three bolt holes line up on the pass. side but are about 3/8 " off on the drivers side. I guess I will have to figure out weather I have goofy fender or some thing else going on. Need to devote more time to it.

[Rob Peters]

Almost sounds as if you have a 70 fender on one side and a 71/72 fender on the other side.

rob

[Denny]

ya the one on the driver side is the one I bought from a person on this sight was claimed to be a nos 70, guess I don't know how to check, I do know its the same as the other were it bolts to the core support, 70 specific.Allmost as if it were a aftermarket fender.

[Dtret]

Take a picture of the fender where it bolts to the top of the core support and post it. Take the picture from just above the hood latch to the driver’s side. 

[Rob Peters]

Here is how to tell them apart.

Radiator Support and Fenders
With the headlights moved further apart for 1971 this changed the radiator support and fenders for that year. With the movement of the headlights in 1971 the radiator support was changed to accommodate this and also resulted in a change of how the fenders need to be bolted to the radiator support. As a result the 1970 fenders are for one year only. For 1972 the changes to the radiator support were minor to allow the wider grille and new parking light location. There were no changes to the fender for 1972 and will interchange with 1971.

1970 fender and radiator support

[Denny]

her is a pic. of the driver fender were it meets the core support.

[Denny]

her is a pic. of the pass. side bumper filler as you can see the bolt holes line up. The following pic. is of the driverside that doesn't line up.

[Denny]

have to try to send driverside later, cant get it to load

[Denny]

finally had some time lastnight ,got things to line up a lot better.The bottom of driver side fender had to come in. Allmost need another set of eyes on everything when trying to line up panels.Thanks for the help guys.