Jump to content

Recommended Posts

Posted

Take a look at this pic of the passenger side fender and inner fender. How in the heck am I so far off here. The drivers side isn't this bad  . Any ideas or place to start? 

 

 PXL_20240716_035829964.thumb.jpg.d29a9043e75a4cb44353f50f8f79fac9.jpg PXL_20240718_223157401.thumb.jpg.11dad2a3c9f87967e38fb87dfb073927.jpgPXL_20240716_035831990.thumb.jpg.126df73a435a74d025c93865d922391d.jpgPXL_20240718_223202706.thumb.jpg.08bfe52d5005bdefd5d91af8b1d0d4e9.jpgPXL_20240718_223205124.thumb.jpg.267896cdd84f419d817f809abdbfc64c.jpg  

Posted

I think the steel fender needs to be pushed in way more, at the wheel opening area, and pulled forward some, till it has a ft of door to rear of fender, gap that matches, like till the bolt hole lines up for the plastic inner fender.

Is it a new plastic inner fender? Perhaps it was damaged?

Posted

When aligning the fenders make sure the car is sitting with weight in the wheels. If it is on jacks or a lift the flex in the frame will through you completely off. It is amazing how much the frame flexes on these cars.

  • Like 2
Posted
1 hour ago, Gush's monte said:

When aligning the fenders make sure the car is sitting with weight in the wheels. If it is on jacks or a lift the flex in the frame will through you completely off. It is amazing how much the frame flexes on these cars.

I did fit them while it was on the lift so that maybe one issue I have. Can I realign it after setting with the inner fender still on?

Posted
1 hour ago, stangeba said:

I think the steel fender needs to be pushed in way more, at the wheel opening area, and pulled forward some, till it has a ft of door to rear of fender, gap that matches, like till the bolt hole lines up for the plastic inner fender.

Is it a new plastic inner fender? Perhaps it was damaged?

It is new yes, I don't think it was damaged per se or just out of the box jacked up. Because like I said the other side lines up really well compared to this side. I'd hate to buy another one and have the same problem. I thought about sourcing some Chevelle steel inners as I heard they fit better. 

Posted

Where did you purchase the inner plastic fender from?

I need a new right one, it's cracked under the battery.

CARS Inc is close to me so I could just pick them up but haven't gotten there yet...

Posted

Be careful opening the doors when the car is on a lift too. Sometimes the door front edge may rub the fender, chip the paint....

  • Like 2
Posted
2 hours ago, stangeba said:

Where did you purchase the inner plastic fender from?

I need a new right one, it's cracked under the battery.

CARS Inc is close to me so I could just pick them up but haven't gotten there yet...

I bought it from Ebay, here it is: https://www.ebay.com/itm/285858218607

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...