Jump to content

Recommended Posts

Posted

Does anybody know what these connectors are for? I've already got the A/C controller all terminated (71 Monte Carlo). 

IMG_0462.jpg

Posted

IF I'm reading the diagram right, the harness on the left (T-shaped lt blue,pink, orange) is for the heater resistor....

The harness on the right is for NON A/C heater controls... the fan selection and panel lighting.

I'm assuming you've bought a complete wiring harness, which will have wires for both A/C and non A/C cars.... Some of these wires won't get used, depending on what options your car has.  

  • Like 1
Posted

See the bottom right. There’s a couple of relays that should be under the dash. My 71 SS with AC has both these relays.

IMG_5162.jpeg

  • Like 2
  • Thank You! 2
Posted
3 hours ago, Canuck said:

See the bottom right. There’s a couple of relays that should be under the dash. My 71 SS with AC has both these relays.

 

That's a good picture. Ronnie & I have been talking, etc about this, and he said it was a new AAW harness. It turns out the 71 is different than the 70 & 72 as they don't use those relays. The factory service manuals also reflect the 71 having those, but not the other two. Odd....

I replaced my AC harness at the same time and it had a different part number than what he bought, that was the first head scratching moment (AAW doesn't have pics of the 71 harness on their site). Turns out 70 is a different part number too, but not for the relay reasons.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...