72 Monte Carlo Posted Wednesday at 09:34 PM Author Posted Wednesday at 09:34 PM 16 minutes ago, stangeba said: Check out the MORRIS 3 point safety belt system for the ft two seats. I like mine. I would get them, but I cannot afford to pay that much for a set of seat belts right now. Quote
stangeba Posted Wednesday at 09:40 PM Posted Wednesday at 09:40 PM 3 minutes ago, 72 Monte Carlo said: I would get them, but I cannot afford to pay that much for a set of seat belts right now. Could someone sew a piece of leather or some other material, into a cover that would slide over the seat belt? Quote
72 Monte Carlo Posted Wednesday at 10:39 PM Author Posted Wednesday at 10:39 PM Do the standard front seat belts have the automatic retractor or is that only for the deluxe seat belts? Mine has the automatic retractor for the outsides of the front seats just inside the doors. With as many members we have here who probably have first gen Monte parts cars, that they don't have a set of the inner receivers for bucket seats. Quote
stangeba Posted Wednesday at 10:53 PM Posted Wednesday at 10:53 PM I don't know about 72 it may have been improved for 72 but yes for 71 with the optional deluxe safety belts. My 71 Deluxe option had a fixed length Female end that has the release button with a smaller release button and an automatic tension retractor / roll up on the other Male end. 2 Quote
Dtret Posted Wednesday at 11:22 PM Posted Wednesday at 11:22 PM 35 minutes ago, 72 Monte Carlo said: Do the standard front seat belts have the automatic retractor or is that only for the deluxe seat belts? Mine has the automatic retractor for the outsides of the front seats just inside the doors. With as many members we have here who probably have first gen Monte parts cars, that they don't have a set of the inner receivers for bucket seats. All seats have the retractor by the door. The bucket seat belt ( next to the console) is short and has the vinyl cover to help keep it from falling between the seat and the console. Bruce’s picture is correct for the deluxe you have the standard. I went through the same ordeal with my car. The inners were tough to find. Ironically I have a ton of seat belts but none of the inners you’re looking for. The guy I bought all these parts off of was a swapper and most anything good was sold ( I didn’t get any buckets either 😞). 1 Quote
Rob Peters Posted Thursday at 12:09 AM Posted Thursday at 12:09 AM 3 hours ago, 72 Monte Carlo said: Is this style considered the standard or deluxe seat belt? I'm assuming that only the deluxe style would have the vinyl covered inner female receptacle side of the seat belts. Standard. rob Quote
72 Monte Carlo Posted Friday at 03:36 PM Author Posted Friday at 03:36 PM Beings that I couldn't find just the inner front bucket seat belts by themselves, I just caved and ordered a set of black 3 pt front bucket seat belts from Morris Concepts. Buy once, cry once! Quote
stangeba Posted Friday at 04:40 PM Posted Friday at 04:40 PM Do they still offer the buckle in the smaller size that looks just like the OEM deluxe belts, and do they still ask if it's for bench or bucket seats? I really like them because prior to getting them I NEVER used the shoulder strap belt in my 71 Monte. Enjoy and be safe! 1 Quote
420ponies Posted Friday at 06:06 PM Posted Friday at 06:06 PM (edited) 2 hours ago, 72 Monte Carlo said: Beings that I couldn't find just the inner front bucket seat belts by themselves, I just caved and ordered a set of black 3 pt front bucket seat belts from Morris Concepts. Buy once, cry once! Isn't it nice when we spend someone else's money? I'm the type that buys once, loses it (no where to be found), go buy another, then find it 2 weeks later!...... must be that old thing happening again.🤔 Edited Friday at 06:07 PM by 420ponies spellling 2 2 Quote
72 Monte Carlo Posted 18 hours ago Author Posted 18 hours ago 12 hours ago, stangeba said: Do they still offer the buckle in the smaller size that looks just like the OEM deluxe belts, and do they still ask if it's for bench or bucket seats? I really like them because prior to getting them I NEVER used the shoulder strap belt in my 71 Monte. Enjoy and be safe! Yes, it's the smaller starburst buckles on the bucket and bench 3 pt seat belts. Below is the email I received from Sarah Morris at Morris Classic Concepts; Thank you for your interest in our seat belts and for contacting us! Once you add your item(s) to the cart, you’ll proceed to the first checkout page. You should see a discount code text box near the upper righthand corner if using a computer, where you can type MONTECARLOCLUB and click “Apply.” It should adjust your merchandise total to give you 5% off, and you’ll be able to then continue checking out with your shipping and payment information! Please let me know if you have any questions! Thanks, Sarah Morris sales@morrisclassic.com (864) 987-0032 Here's the link to the Monte front bucket seat belts https://www.morrisclassic.com/products/monte-carlo-front-3-point-seatbelts-for-bucket-seats Here's the link to the Monte front bench seat belts https://www.morrisclassic.com/products/monte-carlo-front-3-point-seatbelts-for-bench-seats 1 Quote
72 Monte Carlo Posted 18 hours ago Author Posted 18 hours ago 11 hours ago, 420ponies said: Isn't it nice when we spend someone else's money? I'm the type that buys once, loses it (no where to be found), go buy another, then find it 2 weeks later!...... must be that old thing happening again.🤔 I wish it was someone else' money, but I end up paying for it. 1 Quote
Dtret Posted 11 hours ago Posted 11 hours ago You shouldn’t be disappointed. It’s money well spent and safety is the priority. Quote
stangeba Posted 11 hours ago Posted 11 hours ago Back when I bought my MORRIS belts there was the GM logo option (shown in this picture) that I paid extra for. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.